About changing the power level, Time Cook

Enter the second cook time.

About changing the power level.

ge.com

The power level may be entered or changed immediately after entering the time for Time Cook or Express Cook.

	Press TIME COOK.
1
	Enter cooking time.
2
	Press POWER LEVEL.
3
	Select desired power level 1–10.
4
	Press START.
5

Variable power levels add flexibility to microwave cooking. The power levels on the microwave oven can be compared to the surface units on a range. Each power level gives you microwave energy a certain percent of the time. Power level 7 is microwave energy 70% of the time. Power level 3 is energy 30% of the time. Most cooking will be done on High (power level

10)which gives you 100% power. A high setting (10) will cook faster but food may need more frequent stirring, rotating or turning over. A lower setting will cook more evenly and need less stirring or rotating of the food. Some foods may have better flavor, texture or appearance if one of the lower settings is used. Use a lower power level when cooking foods that have a tendency to boil over, such as scalloped potatoes.

Rest periods (when the microwave energy cycles off) give time for the food to “equalize” or transfer heat to the inside of the food. An example of this is shown with power level 3—the defrost cycle. If microwave energy did not cycle off, the outside of the food would cook before the inside was defrosted.

Here are some examples of uses for various power levels:

High 10: Fish, bacon, vegetables, boiling liquids.

Med-High 7: Gentle cooking of meat and poultry; baking casseroles and reheating.

Medium 5: Slow cooking and tenderizing for stews and less tender cuts of meat.

Low 2 or 3: Defrosting; simmering; delicate sauces.

Warm 1: Keeping food warm; softening butter.

Safety Instructions

Operating Instructions

About the time features.

Troubleshooting

Time Cook

Allows you to microwave for any time up to 99 minutes and 99 seconds.

Power level 10 (High) is automatically set, but you may change it for more flexibility.

Time Cook I

		Press TIME COOK.
	1	Press TIME COOK.
		Enter cooking time.
	2	Enter cooking time.
		Change the power level if you don’t
	3	Change the power level if you don’t
	3	want full power. (Press POWER LEVEL.
		want full power. (Press POWER LEVEL.
		Select a desired power level 1–10.)
		Press START.
	4	Press START.

You may open the door during Time Cook to check the food. Close the door and press START to resume cooking.

Time Cook II

Lets you change power levels automatically during cooking. Here’s how to do it:

1 Press TIME COOK.

2 Enter the first cook time.

3 Change the power level if you don’t want full power. (Press POWER LEVEL. Select a desired power level 1–10.)

4 Press TIME COOK again.

6 Change the power level if you don’t want full power. (Press POWER LEVEL. Select a desired power level 1–10.)

7 Press START.

At the end of Time Cook I, Time Cook II counts down.

Tips

Consumer Support