GE JEM31L manual Keep Door Closed, Auto Cook Codes

Auto Cook

The Auto Cook feature may be used to eliminate your need to look up cooking time ii the cookbook or guess how long to set cooking time. By actually sensing the steam that escapes as food microwaves, this feature automatically adjusts the oven’s cooking time to various types and amounts of food.

Because most cooking containers must be covered during Auto Cook, this feature is best with foods that you want to steam or retuin moisture.

for u dry look or crisp surface after cooking should not be Auto Cooked. [t is best to Time Cook them.

Foods that microwave best using the temperature probe should be Temp Cooked or Auto Roasted.

Easy to Use

Simply touch three control pads—AUTO COOK, desired code, and START. The word “AUTO” appears on the display and the sensor is activated to sense steam from food.

Example:

[ml

Pl~ce covered food In oven Touch AUTO COOK p~d “ENTER COOK CODE” fla$he$ on dl~play

E

Foods Recommended

A wide variety of foods including meats, fish casseroles, vegetables, leftovers and convenience foods can be Auto Cooked.

Foods Not Recommended

Foods that must be cooked uncovered, foods that require constant attention, foods that require addition of ingredients during cooking, and foods calling

Keep Door Closed

Do not open the oven door while the word “AUTO” is displayed— steam escaping from the oven can affect cooking performance. If the door is opened, close the door and touch START immediately.

Auto Cook Codes

Auto Cook codes 1 through 8 are designed to give you easy automatic results with a number Of foods.

Code 1, designed for reheating foods quickly, turns the oven off automatically as soon as the sensor detects steam from the foods.

When codes 2 through 8 are selected, the oven determines how much additional cooking time is needed after steam has been sensed, automatically switches to TIME COOK and signals. The word “AUTO” on the display

is then replaced by countdown numbers indicating remaining cooking time. When the signal is heard, the oven door may be opened for stirring, turning or rotating food.

A guide behind the oven door lists cooking codes for frequently prepared fresh or uncooked foods and appropriate codes are recommended in the recipes

and cooking guide in this book.

Touch number pad for desired code. “CODE 2“ shows. After 4 seconds, “START” flashes on display. Touch START.

Word “AUTO” shows on display, indicating steam sensor is activated. DO NOT OPEN DOOR.

OPENING DOOR MAY AFFECT COOKING PERFORMANCE.

Beep sounds when steam is sensed and “AUTO” is replaced by cook time. Rotate or stir food, if necessary. When done, oven beeps every minute until door is opened or CLEAWOFF is touched.

19