GE JKS0627 Special features of your oven control, Safety Instructions, Operating Instructions

Page 6

Safety Instructions

Special features of your oven control.

Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them.

The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.

When the display shows your choice, press the START pad. The special features will remain in memory after a power failure.

Operating Instructions

12 Hour Shut-Off

With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.

If you wish to turn off this feature, follow the steps below.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the DELAY START pad until no shdn (no shut-off) appears in the display.

Press the START pad to activate the no shut-off and leave the control set in this special features mode.

Fahrenheit or Centigrade Temperature Selection

Care and Cleaning

Your oven control is set to use the Fahrenheit temperature selections but you may change this to use the Centigrade selections.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the BROIL HI/LO and COOKING TIME pads at the same time. The display will show F (Fahrenheit).

Press the BROIL HI/LO and COOKING TIME pads again at the same time. The display will show

C(Centigrade). Press the START pad.

Consumer Support Troubleshooting Tips

Cook and Hold

Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after Timed Baking or Roasting is finished.

NOTE: This feature can only be programmed to work with Timed Baking or Roasting. (See the Using the timed baking and roasting features section.) After Timed Baking or Roasting has automatically stopped, the programmed Cook and Hold will automatically start.

To activate this feature for use after Timed Baking or Roasting, follow the steps below.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the COOKING TIME pad. The display will show Hld OFF.

Press the COOKING TIME pad again to activate the feature. The display will show Hld ON.

Press the START pad to activate the cook and hold feature and leave the control set in this special features mode.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Built-In Oven Write the model and serial numbers here Model # Serial #Safety Precautions Safety Instructions Cook Meat and Poultry THOROUGHLY… ConsumerUsing the oven controls Care and CleaningSafety Instructions Operating Instructions Care and Cleaning Special features of your oven controlSafety Instructions Operating InstructionsTroubleshooting Tips Consumer Support SafetyInstructions Care and Cleaning Instructions OperatingUsing the Sabbath Feature How to Set for Regular Baking/RoastingCare How to Exit the Sabbath Feature Instructions Using the ovenTroubleshooting Tips Consumer SupportHow to Set the Oven for Broiling Broiling GuideHI Broil Troubleshooting Using the clock, timer and control lockoutCleaning Tips CareSafety Instructions How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop Operating Instructions CareTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfCleaning Operating Instructions Type of margarine will affect baking performanceCleaning Troubleshooting Tips Consumer Care and cleaning of the ovenSafety Instructions Operating Instructions Care SupportLift-Off Oven Door Consumer Support Troubleshooting TipsTo clean the inside of the door To remove the doorOven Light Bulb on some models Instructions Care and CleaningInstructions Operating To removePainted Surfaces Control PanelBefore You Call For Service… Oven will not work Power outageHot or too cold A numberWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Instructions Care GE Built-In Electric Oven WarrantyCleaning Troubleshooting Tips Consumer Support GE Will ReplaceConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio

JKS0627 specifications

The GE JKS0627 is a cutting-edge gas turbine developed by General Electric, known for its advanced design and efficiency in power generation. This model represents a significant advancement in turbine technology, catering to the growing energy demands worldwide while emphasizing environmental sustainability.

One of the main features of the GE JKS0627 is its high efficiency rate, which is achieved through the incorporation of state-of-the-art materials and design methodologies. The turbine is capable of operating at higher temperatures and pressures, resulting in improved thermal efficiency. This translates into lower fuel consumption and reduced greenhouse gas emissions, making it an environmentally friendly option for energy producers.

The JKS0627 utilizes advanced aerodynamics in its blade design. The blades are crafted using advanced alloys that withstand extreme conditions, ensuring longevity and reliability. This focus on durable materials minimizes maintenance requirements and increases operational uptime, providing a significant advantage in cost-effectiveness for power plants.

Another key technology integrated into the JKS0627 is its digital twin capabilities. This feature allows for real-time monitoring and analysis of the turbine's performance. By simulating various operational scenarios, engineers can predict failures before they occur, enhance maintenance strategies, and optimize performance. This predictive maintenance capability leads to increased efficiency and lower operational costs.

The GE JKS0627 is also designed with flexibility in mind. It can operate on various types of gaseous and liquid fuels, making it suitable for a wide range of applications, from peaking power plants to baseload generation. This adaptability is particularly important in today’s dynamic energy market, where the demand for different fuel sources can fluctuate.

Additionally, the turbine supports a seamless integration into renewable energy systems. Its ability to ramp up and down quickly complements intermittent renewable sources like wind and solar, providing the necessary backup power to ensure grid stability.

In conclusion, the GE JKS0627 stands out in the turbine market due to its high efficiency, advanced materials, digital twin technology, fuel flexibility, and adaptability to renewable integration. These characteristics make it a formidable contender in the quest for sustainable energy solutions in an ever-evolving global landscape. With its innovative design and reliable performance, the GE JKS0627 is poised to play a crucial role in the future of power generation.
Top Page Image Contents