GE D2092P129, JVM140 Cooting by~me, Using the ~me Cook II Feature, How to Change Power hvel

Cooting by~me

Time Cook I &II allows you to microwave for a ~reset amount of time using automatic power level 10 (High), or change power level automatically.

Power level 10 (High) is recommended for most cooking, but you may change this for more flexibility. See the cookbook.

To become better acquainted with time cooking, make a cup of coffee by following the steps below.

Step 1: Fill a cup 2/3 full of water, add 1 teaspoon of instant coffee and stir to dissolve. Use a cup that has no metal decoration and is microwave-safe (refer to Microwaving Tips on page 3). Place cup in oven and close door.

Step 2: Touch TIME COOK I & II.

Display shows “: O“ and “POWER 10?’ “ENTER COOK ~E I“ flashes.

Step 3: Select your time. Touch 1 and MIN pad for one minute. Display shows “1:00” and “POWER 10?7 “COOK TIME I“ flashes.

Because automatic Power level 10 is recommended fo~ this cup of coffee, there is no need to change the power level. (If power level-10 is not appropriate, see “How to Change Power Level” at right.)

Step 4: Touch START. “COOK TIME 1;’ “ POWER 10” and time counting down show on display.

Step 5: When time is up, the oven signals and flashes “End!’ Oven, li~ht and fan shut off.

Step 6: Open the door.

Using the ~me Cook II Feature

The Time Cook II feature lets you set two time cooking functions within one program. This is ideal if you want to change power levels during your cooking operations. Here’s how to do it.

Step 1: Place food in oven in microwave-safe container and close the door.

SteD 2: Touch TIME COOK I & II.

Dis~lay shows “: O“ and “POWER 10~’ “ENTER COOK TME I“ flashes.

Step 3: Select your cooking time. For example, touch 2, 1 and 5 for two minutes and 15 seconds.

Display shows “2:E” and “POWER 10?’ “COOK TIME 17’ flashes.

Step 4: Touch TIME COOK I & II.

Step 5: Set your cooking time.

How to Change Power hvel

After setting cooking time, touch POWER LEVEL pad, then touch desired number for new power level.

Step 6: Touch START.

Step 7: “POWER 107’ is displayed and “COOK TIME I“ counts down.

Step 8: At the end of “COOK TIME 1:’ the second power level is displayed and “COOK TIME II” is shown counting down.

Step 9: When time is up, the oven signals and flashes “End~’ The oven, light and fan shut off.

Step 10: Open the door.

Questions and Answers

Q. I set my oven for the time called for in the recipe, but at the end of the time allowed, my food wasn’t done. What happened?

A. Since house power varies due to time or location, many time cooking recipes give you a time range to prevent overcooking. Set the oven for minimum time, test the food for doneness, and cook your food a little longer, if necessary.

Q. I touched the number pads and selected my power level. When I touched START, however, my oven didn’t come on. Why not?

A. The TIME COOK I & II pad must be touched before setting the number pads or else your oven will not begin cooking.

Q. I want to cook on a power level other than High. What do I need to do?

A. To change the power level, touch the POWER LEVEL pad, then touch desired number for new power level.

Q. Can I interrupt Time Cook to check the food?

A. Yes. To resume cooking. e.

simDlv close the door and uress

1,

the START pad. The time; must be reset for cooking to resume unless time is remaining on timer.

10