GE JVM1750 manual Turntable Motor, Surface Lamps, Door Assembly, To remove the turntable motor

Page 25

Turntable Motor

The turntable motor is located on the bottom of the microwave oven. Motor is a 21vac motor.

To remove the turntable motor:

1.Remove 6 Phillips-head screws from the bottom of the microwave oven cabinet.

A microwave leakage test must be performed any time a door is removed, replaced, disassembled, or adjusted for any reason. The maximum leakage is 4 MW/CM2.

To remove the door, first remove the grill assembly. (See Grill Assembly.) Then lift the door up and disengage from the hinge pins.

Pin

2.Disconnect the turntable motor wiring harness.

3.Remove single Phillips-head screw and twist motor slightly clockwise to release motor from the tab on the frame.

Tab

Disconnect

Pin

Surface Lamps

The surface lamps are 120V, 40-watt incandescent bulbs (part number WB06X10823).

Note: Model JVM1750 has two bulbs. The JVM1540 model has a single bulb.

To remove the surface lamp assemblies:

1.Remove the Phillips-head screw from the surface lens panel, then open the panel.

Door Assembly

The door is available as a complete assembly or as individual parts.

2. Carefully remove the bulbs.

– 25 –

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Technical Service Guide GE Consumer & Industrial Table of Contents M 1 7 5 0 D P 1 B B NomenclatureModel Number Introduction Features and BenefitsJVM1750 Features Control FeaturesConvenience Guide JVM1540 FeaturesJVM1750 Controls Time FeaturesJVM1540 Controls Time FeaturesDemo Mode JVM1750 Component Locator Views Front View Control Panel Assembly RemovedFront View Right Side View JVM1750 Smart Board Control Boards and Panel ConnectionsJVM1540 Smart Board Oven Removal ComponentsOuter Cover To remove the oven from the cabinet or wall openingTo remove the grill assembly Model JVM1540 Grill AssemblyVent Blower To remove the vent blowerTo remove the grill assembly Model JVM1750 Control Panel AssemblyTo remove the control panel assembly Interior LightCavity Thermal Cutout Duct AssemblySmart Board Magnetron Thermal Cutout TCO Bottom Thermal Cutout TCOHood Thermal Cutout TCO Noise Filter Stirrer AssemblyLine Fuse To remove the fuseVent Fan Motor Capacitor MagnetronCooling Fan Motor Fan Retainer High Voltage Transformer Capacitor and DiodeTo remove the capacitor and diode To remove the high voltage transformerDoor Sensing and Primary Interlock Switches Door Interlock SwitchesMonitor Switch To remove the door interlock switchesTurntable Motor Door AssemblySurface Lamps To remove the turntable motorJVM1750 Diagnosis Flow Chart Diagnostics and Service InformationJVM1540 Diagnosis Flow Chart To test the interlocks Interlocks Door Latch SwitchesTo test the interlock system Ribbon JVM1750, HVM1750, EVM1750 Key Panel TestJVM1540, JNM1541 HVM1540 JVM1750 Schematic Diagram Schematics and Wiring DiagramsJVM1750 Wiring Diagram JVM1540 Schematic Diagram JVM1540 Wiring Diagram For The Period Of GE Will Replace Warranty
Related manuals
Manual 48 pages 35.4 Kb

JVM1750 specifications

The GE LVM1750, EVM1750, HVM1750, and JVM1750 are advanced energy management solutions designed to optimize the performance and reliability of industrial and commercial electrical systems. These products by General Electric (GE) are integral to modern power distribution networks, providing unprecedented efficiency and control.

The GE LVM1750 is a versatile low voltage motor control center that emphasizes compact design and high performance. One of its main features is the ability to accommodate a wide variety of motor and control configurations, making it suitable for diverse applications. It incorporates state-of-the-art technology to ensure quick troubleshooting and reduces downtime through its integrated diagnostic tools.

On the other hand, the EVM1750 is engineered for enhanced energy efficiency. This variant utilizes GE’s proprietary EcoStruxure technology, which facilitates real-time monitoring and control of energy consumption. The EVM1750 features advanced algorithms that optimize energy usage while maintaining operational integrity. This optimizes electricity demands during peak times, which can significantly reduce operational costs.

The HVM1750 is noteworthy for its robust construction and ability to handle high-voltage applications. Its main characteristics include superior thermal performance and advanced safety features designed to mitigate risks in high-demand environments. The HVM1750 is ideal for large industrial operations requiring reliable and efficient power management solutions.

Last but not least, the JVM1750 is tailored for renewable energy integrations. It provides crucial capabilities for managing distributed energy resources (DERs) and optimizing energy flows from renewable sources. The JVM1750 is equipped with smart grid capabilities, allowing seamless integration with other energy management systems. Its adaptability makes it an essential component in today’s shift toward sustainable energy practices.

All four models share characteristics such as scalability, reliability, and ease of maintenance. They are designed with user-friendly interfaces that simplify the monitoring and control processes. Furthermore, their modular designs allow for flexible configurations tailored to specific operational needs.

In summary, the GE LVM1750, EVM1750, HVM1750, and JVM1750 are leading-edge solutions that cater to the evolving demands of modern power distribution, emphasizing energy efficiency, safety, and adaptability. Through these innovations, GE continues to play a pivotal role in advancing electrical management technologies across industries.
Top Page Image Contents