GE JKP75SP dimensions GE 27 Built-In Convection/Thermal Wall Oven, Marks or openings are covered

JKP75SP

GE® 27" Built-In Convection/Thermal Wall Oven

Dimensions and Installation Information (in inches)

KW Rating

240V	6.8
208V	5.1
Breaker Size
240V	30 Amps
208V	30 Amps

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

C	2" x 4" or
L	equivalent
	runners

Suitable
bracing
to support	18"
runners	Over centerline
		of cabinet
	(must support 300 lbs.)

Locate	10
junction box

for 27"models either 5" MIN. below cutout floor or 44" MIN. above cutout floor

Access

from adjacent

cabinet D required

Locate junction box for 24"models 56" MIN. above cutout floor

Allow 3/4"

A for overlap over all edges of cutout

C

B

G

Note: If marks, blemishes or the cutout opening is visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until

Cabinet	27"
A – Cabinet width required	27" min.
B – Minimum cabinet depth	23-5/8"

E

2" X 4" or

Conduit (48-1/2" Long)

21

the marks or openings are covered.

Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

C – Opening width	25" min. - 25-1/4" max
D – Opening height	50-1/8" max
E – Recommended minimum cutout location from floor	13-1/4"
Oven
F – Overall depth*	23-5/8"
G – Overall height with trim	51-7/8" - 52-3/4"
Overall height without trim	51"
H – Overall width	26-5/8"

*Depth including door handle is approximately 26-7/10" min. to 26-8/10" max.

Minimum	equiv. runners
	(cutout floor)
cutout location
from floor

F

21" MIN. door opening allowance

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Created 5/09 320363