GE PSB1200, PSB1201 owner manual Interference

Page 27

Microwaving

Advantium Oven

To use all sensor programs

Advantium’s microwave mode features sensor cooking. The oven automatically senses when food is done and shuts itself off—eliminating the need to program cook times and power levels.

1. Press the COOK pad and turn the dial to COOK BY FOOD TYPE. Press the dial to enter. Or press the REHEAT pad.

2.Turn the dial to select the food you want . Press the dial to enter.

3.Press the dial or press the START/ PAUSE pad to start cooking.

Do not open the oven door until time is counting down in the display.

If the door is opened, close it and press START/PAUSE immediately.

If the food is not done enough, use COOK BY TIME in the microwave selector to cook for more time.

NOTE: Do not use the Sensor Features twice in succession on the same food portion—it may result in severely overcooked or burnt food.

If you have been speedcooking and the oven is already hot, it may indicate that it is too hot for sensor cooking. Of course, you can always continue with COOK BY TIME or

SPEEDCOOK.

NOTE: If the oven is too hot then it will automatically change to time cooking.

To shorten or lengthen the cook time, wait until the time countdown shows in the display. Then turn the dial to add or subtract time.

If you open the door while Sensor Cooking, SENSOR ERROR will appear. Close the door, press START/PAUSE to begin again.

Notes about the Reheat program:

Reheated foods may have wide variations in temperature. Some areas may be extremely hot .

It is best to use COOK BY TIME and not REHEAT for these foods:

Bread products

Food that must be reheated uncovered.

Foods that need to be stirred or turned.

Foods calling for a dry look or crisp surface after reheating.

Things that are normal

Interference

TV/radio interference might be noticed while using the microwave. Similar to the interference caused by other small appliances, it does not indicate a problem with the microwave. Move the radio or TV as far away from the microwave as possible, or check the position of the TV/radio antenna.

Lights

The oven cavity light will come on during a microwave cooking cycle.

Oven Heat

Cookware may become hot because of heat transferred from the heated food. Oven mitts may be needed to handle the cookware.

Steam or vapor may escape from around the door.

27

Image 27
Contents GE Profile Ge.comExcessive Microwave Energy Safety Precautions Use foil only as recommended in this manual Metal or foil touching the side of the ovenSpeedcook oven-safe cookware Oven and door will get very hot when speedcookingDo not microwave empty containers Follow these guidelinesBefore feeding the baby Cleaning of the oven section forGetting to know Advantium What is Advantium?Advantium Quick Start Set the clock Microwaving with ExpressSpeedcook Menu Guide Display promptsOperates when using speedcook Oven FeaturesOven features Operates when using speedcook or broilExpress Microwave Access the Beeper Volume, ClockSPEEDCOOK/Repeat Last Cook MicrowaveTo review settings during cooking, press the selector dial SpeedcookingTo resume cooking Overlap Browning when cooking foods directlyCooking tips for great tasting results To ensure consistent and evenSpeedcook power level Be sure to select a size that will rotate easily Display will prompt you to select the power levelsTo find and use stored favorite recipes To adjust or change stored custom speedcook recipes Press the dial to editTo delete stored custom speedcook recipes Things that Are normalOven Heat Bake How to Broil or ToastBaking, Broiling and Toasting How toWarming and Proofing WarmingProofing Cook Defrost Reheat MicrowavingCooking tips ExpressUse Time Defrost to defrost for a selected length of time Defrost by food typeDefrost by time Conversion GuideDefrosting tips Microwave Sensor Programs Microwave sensor cookingInterference Other Advantium Features Features found in the Help function HelpPress the Help pad Timer Press the Timer padTo cancel, press Timer Turntable Do not use the oven without Turntable in place Care and CleaningHow to clean the inside Helpful hintsGlass Control Panel and Door on some models How to clean OutsideCooking trays and baking sheet CaseTroubleshooting Lighted yet oven Display is blankAppears in display Control display isWarrantor General Electric Company. Louisville, KY Advantium Oven WarrantyConsumer Support Schedule Service

PSB1200, PSB1201 specifications

The GE PSB1201 and PSB1200 are state-of-the-art power supply units designed for a variety of applications, catering primarily to industrial and commercial needs. Both models showcase GE's commitment to reliability, efficiency, and cutting-edge technology, making them ideal choices for critical systems that require robust power solutions.

One of the standout features of the PSB1201 and PSB1200 is their high efficiency rating. These power supplies utilize advanced switching technology which minimizes energy losses during operation. As a result, they not only provide stable and reliable power but also reduce operational costs through lower energy consumption. This efficiency is crucial in environments where energy savings are a priority, and operational budgets are tight.

Both models are designed to offer a wide input voltage range, allowing them to accommodate various power conditions. This versatility ensures that they can be used in different settings without the need for additional transformers or converters. The PSB1201 and PSB1200 also incorporate multiple output options, enabling them to deliver power tailored to specific requirements in diverse applications, such as automation systems, telecommunication equipment, and critical infrastructure support.

Another significant characteristic of these units is their robust construction, designed to withstand harsh environments. They are built with durable materials and feature advanced thermal management systems to allow operation in extreme temperatures and conditions. This durability makes the GE PSB1201 and PSB1200 ideal for outdoor applications or locations prone to dust, moisture, and other environmental challenges.

The PSB1201 and PSB1200 also come equipped with various protection features, including over-voltage, under-voltage, and short-circuit protection. These safety mechanisms not only safeguard the power supply itself but also protect connected devices from potential damage, ensuring longevity and reliability in operation.

In terms of connectivity, these units support multiple communication protocols, making them easy to integrate into existing systems. This feature simplifies monitoring and control processes, allowing for real-time feedback on power supply performance and alerts for any operational issues.

In conclusion, the GE PSB1201 and PSB1200 power supply units represent a blend of efficiency, versatility, and durability. With their advanced technologies and comprehensive safety features, they stand out as prime solutions in the field of power supply design, ensuring that critical systems remain powered and operational across diverse sectors.