Care and Cleaning, Exterior surfaces | GE ZDIC150, ZDIS150 guide

Care and Cleaning

Ice maker

Ice maker system care

CLEANING NEEDED will illuminate when the electronic control senses that the need for cleaning is approaching. At this time you need to purchase Nickel Safe Ice Machine Cleaner by Nu Calgon, available at most appliance repair shops or through GE Parts and Accessories. Order part number WX08X42870. In the U.S.A., call 1.800.626.2002. or visit GEApplianceParts.com. In Canada call 1.800.561.3344. The ice maker must be cleaned, otherwise ice production may decrease significantly or stop.

REPLACE FILTER will illuminate when the electronic control senses that the filter needs to be replaced. At this time you need to purchase a replacement filter, part number IMWF, through GE parts at www.gewaterfilters.com or in the US call 1.800.626.2002.

Product designed and tested for use with genuine GE water filters. Non-GE filters are not covered under product warranty.

Exterior surfaces

.HHSWKHRXWVLGHFOHDQWipe with a clean cloth lightly dampened with mild liquid dish detergent. Dry with a clean, soft cloth. Do not wipe the ice maker with a soiled dish cloth or wet towel. These may leave a residue that can damage the finish. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and damage the finish.

6WDLQOHVVVWHHO³Regularly clean and polish the stainless steel door panels and handles (on some models) with a commercially available stainless steel cleaner such as Stainless Steel Magic™ to preserve and protect the fine finish. Order part number WX10X15. In the U.S.A. call 1.800.626.2002 or visit GEApplianceParts.com. In Canada call 1.800.561.3344.

'RQRWXVHDSSOLDQFHZD[RUSROLVKRQWKH stainless steel.

Interior components

WARNING: Disconnect electrical power to the ice maker before cleaning. Failure to do so can result in death, fie, or electrical shock.

AVERTISSEMENT !

Débranchez l'alimentation électrique à la machine à glaçons avant le nettoyage. L’omission de prendre cette précaution peut entraîner la mort, l'incendie ou le choc électrique.

1.Open the storage bin door and remove any ice that is in the bin.

2.Pull out on the bottom of the cutter grid cover until the snaps release to remove.

3.Remove ice scoop and ice scoop holder. Remove the two screws using a 1/4" ratchet.

NOTE: Do not remove hoses. Do not wash plastic parts in dishwasher. They cannot withstand temperatures above 145°F (63°C).

4.With mild soap and warm water wash the storage bin, ice scoop and holder, cutter

grid cover, door gasket, and secured interior components (cutter grid, exterior of hoses, and water reservoir). Rinse with clean water.

5.Clean the same parts again with a solution of

1 tbsp. (15 ml) of household bleach in 1 gal. (3.8 L) warm water. Rinse thoroughly with clean water.

6.Gently wipe the control panel with a soft, clean dishcloth using warm water and a mild liquid dish detergent.

7.Replace ice scoop holder.

8.Replace the cutter grid cover by aligning top tabs and pushing to snap into place.

9.Plug in ice maker or reconnect power.

NOTE: The air cooled condenser needs to be cleaned regularly for efficient ice production and energy conservation. See Care and Cleaning - Condenser section.

ZDIC150, ZDIS150 specifications

The GE ZDIS150 and ZDIC150 are state-of-the-art disconnect switches designed for high-performance electrical systems, predominantly used in industrial and commercial applications. These switches are integral to ensuring safety, reliability, and efficiency in power distribution networks.

The ZDIS150 is recognized for its robust construction and versatility. It supports a wide range of current ratings, making it suitable for various electrical loads. This model features an advanced direct drive mechanism that ensures a reliable and quick disconnection of circuits, reducing downtime in maintenance and repair activities. Moreover, the ZDIS150 is designed to withstand harsh environmental conditions, with robust weatherproof enclosures that ensure long-lasting performance even in extreme situations.

On the other hand, the ZDIC150 serves as an innovative solution in disconnect technology. This model incorporates smart features such as remote monitoring capabilities, which allow operators to keep tabs on the switch status in real time. The ZDIC150 is equipped with integrated sensors that provide alerts on potential faults, enhancing predictive maintenance efforts and minimizing unplanned outages.

Both models share significant characteristics that optimize their operation. For instance, both switches utilize advanced dielectric materials to ensure superior electrical insulation, thereby increasing safety and operational efficiency. These materials help reduce the risk of electrical failures, making the switches ideal for critical applications where reliability is paramount.

In terms of installation, the ZDIS150 and ZDIC150 exhibit user-friendly design elements. Their lightweight construct allows for easier handling and installation, while their modular design ensures compatibility with various mounting configurations.

Additionally, both models are designed with eco-friendliness in mind. They comply with international environmental standards, minimizing the ecological footprint throughout their lifecycle.

In conclusion, the GE ZDIS150 and ZDIC150 combine advanced technology with robust construction to provide unparalleled performance in electrical disconnection applications. Their features, including weather resistance, remote monitoring, and eco-friendly design, position them as leaders in the market, ideal for enhancing the safety and reliability of electrical systems in diverse settings. As industries continue to evolve, these disconnect switches will play a critical role in shaping the future of power distribution and management.