Sirius Satellite Radio AM/FM SV3 manual Installation

The FM Extender Antenna should be placed inside the vehicle, as close as possible to the vehicle’s FM antenna. A test mounting should be done first using the included suction cup mounts to test the installation. Once an acceptable location has been found, you will remove the suction cups and permanently adhere the FM Extender Antenna using the adhesive mounts.

To install the FM Extender Antenna in your vehicle, follow these instructions:

1. Attach the suction cups to the FM Extender Antenna in the positions shown in Figure 13.

Suction Cups

Figure 13

2.In this step, follow the specific instructions in sub-step a, b, c, or d depending on the type of FM antenna in your vehicle:

a.Installation Instructions for Vehicles with Aerial Type Fender Mounted FM Antenna. For vehicles where the FM radio antenna is located on the front fender, the FM Extender Antenna should be mounted vertically on the front windshield at the edge of the glass nearest to the antenna. (Figure 14)

For vehicles where the FM radio antenna is located on the rear fender, the FM Extender Antenna should be mounted vertically on the rear window at the edge of the glass nearest to the antenna. (Figure 15)

Attach the FM Extender Antenna to the section of glass closest to the FM antenna in a vertical orientation. (Figure 14 or Figure 15) The wire between the two suction cups should be pulled taut and as straight as possible, and should not obstruct the driver’s view.

Important Caution: In some states it may not be legal to put the FM Extender Antenna on the windshield glass. In this case, the FM Extender Antenna should be mounted on the A-Pillar adjacent to the FM antenna. (Figure 14)

[ Installation ] 25