GE 681131067331 manual How to Use Your Griddle, Consumer Safety Information

Page 2

IMPORTANT SAFEGUARDS

Please read and save these instructions. When using electrical appliances, basic safety precautions should always be followed, including the following:

Parts and Features

1

Griddle Surface

7

1

6

1.

Read all instructions before using.

2.

Do not touch hot surfaces. Use

 

handles or knobs.

3.

To protect against electrical shock,

 

do not immerse temperature

 

control probe or cord in water or

 

other liquid.

4.

Close supervision is necessary when

 

any appliance is used near

 

children. This appliance is not for

 

use by children.

may cause injuries.

8.Do not use outdoors.

19.Do not let cord hang over edge of table or counter, or touch heated surfaces.

10. Do not place on or near a hot gas

or electric burner, or in a heated

oven.

11. Extreme caution must be used

when moving an appliance

2

Grease Channel

 

 

 

3

Removable Grease Tray

 

2

 

 

4Dupont Teflon Non-Stick Cooking Surface

5Temperature Control Probe

6Probe Guard

7Removable Spatula Rest

3

5

4

5. Unplug from outlet when not in use

and before cleaning. Allow to cool

containing hot oil or other hot

liquids.

How to Use Your Griddle

before putting on or taking off

parts, and before cleaning.

6. Do not operate any appliance with a

damaged cord or plug or after the

appliance malfunctions or has been

damaged in any manner. Call

Customer Service(see warranty) to

return for examination, repair, or

adjustment.

7. The use of accessory attachments

not recommended by manufacturer

12. Always attach temperature control

probe* to appliance first, then plug

cord into the wall outlet. To

disconnect, turn temperature

control probe to “OFF”, then

remove plug from wall outlet.

13. Do not use appliance for other than

intended use.

*Use only model MPTC-1A temperature control probe.

1.

Before use, wash the griddle and

 

GREASE TRAY in warm soapy water,

 

and dry completely. CAUTION: Do not

 

immerse temperature control probe in

 

water or other liquid.

2.

Insert grease tray into guides under

 

the griddle. Turn temperature

 

control probe to “OFF” and attach

 

securely to the griddle.

3.

Condition the Dupont Teflon® non-

 

stick surface with vegetable

 

shortening, wiping off any excess

 

with a paper towel. Plug griddle into

NOTE: When cooking consecutive batches of bacon or other high fat foods, it may be necessary to empty the grease tray to avoid grease overflowing onto the countertop.

CAUTION: Some counter tops are more sensitive to heat, use care not to place griddle on surfaces where heat may cause damage.

CAUTION: Griddle surfaces are hot during use. Allow to cool completely before handling or cleaning.

SAVE THESE INSTRUCTIONS!

Consumer Safety Information

THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.

120 volt outlet. Preheat the griddle

by aligning the selected temperature

setting on the temperature control

probe knob with the indicator light.

Griddle is preheated when the light

on the knob goes off. The light will

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

CAUTION: To reduce the risk of electrical shock, do not immerse the temperature control probe in water or other liquid.

A short power supply cord is provided to reduce the hazards resulting from entanglement or tripping over a longer cord. An extension cord may be used with care; However, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the griddle. The extension cord should not be allowed to drape over the counter or tabletop where it can be pulled on by children or tripped over.

cycle during use, indicating the

selected temperature is being

maintained.

4. When cooking is complete, turn

temperature control probe to “OFF”,

unplug and allow unit to cool before

cleaning. NOTE: It may be necessary to

scrape grease into the grease channel.

Always use wooden or nylon utensils

to avoid scratching the Dupont Teflon®

non-stick surface. CAUTION: Grease

may be hot!

2

3

Image 2
Contents Electric Griddle How to Use Your Griddle Consumer Safety InformationCare of Your Non-Stick Griddle Temperature and Cooking GuideHow to Clean Your Electric Griddle Two Year Limited Warranty Años Dos de Limitada GarantíaPanqueques Antiadherente Parrilla Su De CuidadoLimpiarlo Eléctrica Parrilla Su Usar Cómo Instrucciones Estas GuardeEléctrica Parrilla

681131067331 specifications

The GE 681131067331 is an advanced product designed to meet modern energy demands while prioritizing efficiency and reliability. As part of General Electric's commitment to innovation, this model encompasses a range of features and technologies that enhance performance across various applications.

One of the standout features of the GE 681131067331 is its energy efficiency. With a focus on reducing energy consumption, the device integrates state-of-the-art technology that allows it to operate effectively with minimal energy expenditure. This not only helps in lowering operational costs but also contributes to a reduced carbon footprint, aligning with global sustainability goals.

In terms of technology, the GE 681131067331 incorporates advanced monitoring and diagnostic capabilities. This technology enables real-time tracking of performance metrics, ensuring that users can maintain optimal operating conditions. An integrated software system allows for remote access, enabling users to manage and monitor the unit from virtually anywhere. This connectivity is vital for optimizing performance, facilitating maintenance, and preventing any potential downtime.

Durability is another key characteristic of the GE 681131067331. The product is built with high-quality materials designed to withstand harsh conditions. This attribute is particularly important in industries where equipment is exposed to challenging environments. The rugged design ensures longevity and reliability, thus reducing the frequency and costs associated with repairs and replacements.

The ease of installation and maintenance is another significant advantage of the GE 681131067331. The product comes with comprehensive documentation and user-friendly interfaces that make it accessible for technicians and operators. This simplicity not only speeds up the setup process but also allows for quick servicing, ensuring that any necessary maintenance can be performed efficiently.

Overall, the GE 681131067331 stands out as a model that blends energy efficiency, advanced technology, and durability into a single solution suitable for a variety of applications. Its innovative features position it as a leading choice for industries looking to enhance their operations while embracing sustainable practices. With GE's legacy of quality and innovation backing it, this product is set to deliver exceptional performance and reliability for years to come.