GE 681131689441, GE168944 manual Know Your Blender How to Assemble and Use, Jar and Mill Assembly

Know Your Blender

How to Assemble and Use

Parts and Features

1	Blender Base
2	Filler cap
3	Blender Lid
4

2

3

IMPORTANT: Your blender jar and cutting blades are subject to wear during normal use. Always inspect jar for nicks, chips, or cracks. Always inspect cutting blades for broken, cracked, or loose blades. If the jar or cutting blades are damaged, do not use. Call our toll-free customer assistance number to obtain replacement parts. Make sure blender is unplugged. Place blender base on clean, dry surface to keep foreign particles from being pulled up into the motor during operation.

	Blender Jar
5	Mill Cup
6	Gasket
7	Blender Blade (white)
8	Mill Blade (grey)
9	Blender Retaining Ring

10Mill Retaining Ring

11Pulse

12Stop

13Mill

4

6

7

9

5

8

10

Jar and Mill Assembly

1. Place gasket onto cutting blades

Never place blade assembly on base unless assembled to jar.

2. Place blades through jar opening.

3.Screw retaining ring counter clockwise onto

jar or mill cup. Make sure the retaining ring is firmly screwed onto jar

Before First Use

After unpacking the blender, wash everything except the blender base in hot, soapy water. Dry thoroughly. Wipe the blender base with a damp cloth or sponge. DO NOT IMMERSE THE BASE IN WATER. Care should be taken when handling the blades as they are very sharp.

11

1

13

Keep fingers out of jar while the unit is assembled.

12

2 3