instructions for use
Positioning the Bake Racks
Cookies can be baked using either or both Rack Support Guides with Racks facing up. Layer cakes can be baked on the lower position with the Bake Rack facing down, and on the upper position with the Bake Rack facing up.
Pies can be baked in either or both positions with the Bake Rack facing down. Be sure to place Cookie Sheet under the pies to catch any spills or drips.
Baking Guide
Follow the package or recipe instructions for baking times and temperature.
Toasting
The large capacity oven allows for toasting 4 to 6 slices of bread, 6 English muffin halves, frozen waffles, or frozen pancakes. When toasting only 1 or 2 items, place the food in the center of the oven.
1.Be sure the Crumb Tray is in place.
2.Set the Temperature Control to Broil/Toast.
3.Turn the function control to toast.
4.Bake Rack should be positioned in lower rack support guide, facing up.
5.Place food to be toasted on the Bake Rack.
6.Turn the time control to the desired darkness.
7.Bell will signal and oven will turn off at the end of the toast cycle.
Convection/Keep Warm
Keeps cooked food warm for up to 60 minutes. Longer periods of time are not recommended as food will become dry or spoil.
1.Set the temperature control to 200F.
2.Turn the function control to keep warm.
3.Turn the time control to the Stay On position or use Timer
4.Turn the Time Control to off when warming is complete (if using the Timer, oven will shut off automatically).
care and cleaning
Caution: Do not immerse cord, plug, or appliance into water or any other liquid. Do not use metal scouring pads to clean the oven. Pieces of the pad may break off and touch electrical parts.
1.Unplug the Oven and allow all parts to cool completely before cleaning or moving.
2.All accessories should be washed in hot sudsy water or can be cleaned in the dishwasher. Rinse and dry all accessories thoroughly.
3.The Glass Door can be wiped clean with a damp sponge and wiped dry with a paper or cloth towel.
4.Clean the outside with a damp sponge. DO NOT USE AN ABRASIVE CLEANER, AS IT MAY DAMAGE THE EXTERIOR FINISH.
5.Let all parts and surfaces dry thoroughly prior to plugging in Oven.