GE PT960BM/WM dimensions GE Profile 30 Built-In Double Convection Wall Oven, Cabinet width

PT960BM/WM

GE Profile™ 30" Built-In Double Convection Wall Oven

Dimensions and Installation Information (in inches)

KW Rating

240V	9.0
208V	6.8
Breaker Size
240V	40 Amps
208V	40 Amps

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

			Cutout width
C			28-1/2'' MIN.	5
			28-5/8'' MAX.
L	2 x 4 or
				Cutout depth
	equivalent
	runners			23-1/2" MIN
		E		Junction box
			A	location
			B

Suitable				Conduit
bracing	21-5/8"			(72"
to support				long)
	over centerline					47" to
runners	of cabinet
	(must support 325 lbs.)					bottom of
					Cutout height	junction box
			D		51-13/16" MIN.
Cabinet		30"			51-15/16" MAX.
A – Overlap of oven over side of edges of cutout		11/16"-3/4"			A
B – Overlap of oven at top and bottom of cutout		1"
Oven
C – Overall depth*		23-1/2"	21
D – Overall height with trim		53-3/8"
Overall height without trim		52-7/8"
E –Overall width		29-3/4"	21" minimum		B
*Depth including door handle is approximately 26-6/10" min. to
			Door Opening
					Minimum cutout location
26-9/10" max.			Allowance
				C	12" from the floor.

Cabinet width 30"

MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.

THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.

Listed by

Underwriters

Laboratories

Specification Created 1/07

220135