GE ZBD5700 Light Bulb Replacement on some models, Water fill level, Care and Cleaning, Dishwasher

Page 18
Light Bulb Replacement (on some models)

Care and Cleaning

Dishwasher

Light Bulb Replacement (on some models)

The interior light bulb is located in the rear top right corner.

To replace—

1. Make sure the dishwasher is disconnected from the power supply.

2. Unscrew the plastic lens counterclockwise.

3. Remove the bulb and replace with a maximum 15 watt bayonet bulb no larger than 1″ in diameter and 2″ long.

Order part # WD21X10055.

Light bulb

4. Make sure the seal is correctly fitted to the plastic lens

 

 

 

 

 

 

 

 

 

 

 

 

and screw it firmly into place.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION: The plastic lens must be secured before

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

reconnecting power to the dishwasher.

 

 

Plastic lens

Light bulb ATTENTION : Il faut remettre la lentille de plastique en place avant de rétablir le courant au lave-vaisselle.

Unscrew lens in a counterclockwise direction

Water fill level

For best performance, check the water fill level of your dishwasher.

Once the dishwasher is fully connected, run it through a complete RINSE & HOLD cycle to ensure it is emptying and filling correctly. For low water pressure situations run the RINSE & HOLD cycle 3 times. Half way through the final RINSE & HOLD cycle, pause the dishwasher and check the water level inside the dishwasher. If the water level is not above the minimum water level (marked on the lower spray support tower), increase the fill level.

For Model ZBD5600—Remove the front kickplate and change the Fill Time switch setting.

For Model ZBD5700 and ZBD5900—

Maximum level Water fill levelMaximum level

Manual background Minimum level

Fill time switch Manual background

18

1.Ensure the dishwasher is not running through a cycle. Depress the WATER TEMP button for ten seconds until the second buzzer sounds.

2.Press the CLEAR button to select fill time, as per chart below (80 seconds is the factory setting).

3.To test time, press DELAY START. The dishwasher will start filling. Listen for the dishwasher to complete filling. Once filled, the fill level must be checked to ensure fill time is correct.

4.Once complete, press the WATER TEMP button to exit fill time mode.

 

Cycle Status

Fill time

 

Indicators

 

Continue to press the

PRE-WASH

75 seconds

CLEAR button until

WASH

80 seconds

the desired indicator

RINSE

90 seconds

is illuminated.

 

DRY

100 seconds

 

CLEAN

110 seconds

 

 

 

Page 17 Page 19
Image 18
Page 17 Page 19
Contents GE Monogram Use and Care Guide Dishwasher ZBD5600 ZBD5700 ZBD5900 Introduction ContentsConsumer Information DishwasherWrite down the model & serial numbers Before using your dishwasherIf you need service If you received a damaged dishwasherIMPORTANT SAFETY INSTRUCTIONS WATER HEATER SAFETYPROPER INSTALLATION AND MAINTENANCE WHEN USING YOUR DISHWASHER Read and follow this Safety Information carefullySAVE THESE INSTRUCTIONS Control Settings Control Panel - ZBD5600Control Settings NORMAL Option Selection at 120F. inlet water temperature Start a wash loadWhat happens in each cycle based on the Detergent Usage Guide Powder or LiquidCycle Status Indicators Control Settings Control Panel - ZBD5700 & ZBD5900NSF INTERNATIONAL for cleaning and sanitization of dishes, glasses and utensilsStart a wash load Tone Silencing Meets NSF Protocol for Performance of Domestic SprayAuto Memory Child Lockout Mode Upper Rack Adjusting Upper Rack HeightLoading the Racks Upper Wash TowerUpper Rack Care and Cleaning Exterior Interior Protect Against FreezingThe Air Gap The Air Gap The Wash Filters The Wash Filters Maximum level Minimum level Fill time switch Light Bulb Replacement on some modelsWater fill level Light bulbOptional Accessories Change the Dishwasher’s Appearance for ZBD5600 and ZBD5700 onlyPROBLEM Questions? Use this problem solverBefore You Call For Service them cleanQuestions? Use this problem solver Cleaning section setting to 6. See the Rinse Agent sectionthe MIN. and MAX. indicators on lower Polish silverware with a silver-plate cleanerNotes for your Service Contracts Consumer ServicesService Parts and AccessoriesYOUR MONOGRAM DISHWASHER WARRANTY WHAT IS COVERED From the Date of the Original PurchaseWarranty for customers in the USA WHAT IS NOT COVEREDWarranty for customers in Canada Registration Ownership Product Consumer Today Mail ImportantWarranty Registration Department P.O. Box Louisville, KY Appliances GEProduct Consumer Product Ownership RegistrationFollow these three steps to protect your new appliance investment Model No
Related manuals
Manual 24 pages 29.55 Kb

ZBD5900, ZBD5600, ZBD5700 specifications

The GE ZBD5700, ZBD5600, and ZBD5900 are a trio of state-of-the-art dishwashers that exemplify the cutting-edge technology and innovative design that GE is known for. These models cater to diverse user needs while providing efficient cleaning solutions for modern kitchens.

The GE ZBD5700 stands out with its impressive capacity and advanced cleaning technologies. Equipped with a powerful wash system, this model ensures optimal water pressure and distribution, allowing for a thorough clean even on heavily soiled dishes. One of its key features is the SmartDispense Technology, which automatically dispenses the right amount of detergent based on load size and soil level. This not only enhances cleaning efficiency but also conserves detergent, making it a more eco-friendly option.

In addition, this model includes the exclusive Piranha™ hard food disposer, which pulverizes food particles, preventing clogging and ensuring that every cycle maintains optimal cleaning performance. Furthermore, the ZBD5700 features multiple wash cycles and options, including a quick wash for lightly soiled dishes and a robust high-heat sanitize option that eliminates bacteria.

Moving to the GE ZBD5600, this dishwasher is designed with user convenience in mind. Its adjustable upper rack easily accommodates tall items, while its folding tines can be manipulated to create the necessary space in both the upper and lower racks. Infused with the latest in quiet operation technology, the ZBD5600 impressively operates at a low decibel level, making it perfect for open-concept living spaces.

The ZBD5900 offers the best of both worlds, combining sophisticated aesthetics with high-performance functionality. Its sleek design features a stainless-steel finish that not only looks elegant but is also fingerprint resistant. This model showcases advanced Dry Boost technology, which provides superior drying performance, ensuring your dishes come out spotless and ready to use.

All three dishwashers are Energy Star certified, affirming their commitment to energy efficiency. This translates to reduced utility bills and a lower environmental footprint, giving consumers peace of mind with their purchase.

In summary, the GE ZBD5700, ZBD5600, and ZBD5900 represent a significant leap forward in dishwasher technology, combining impeccable cleaning abilities with design and energy efficiency. Each model offers unique features, ensuring that there is a perfect fit for every household.
Top Page Image Contents