Preparation
36”
Refrigerator/ freezer location
Do not install the refrigerator/freezer where temperatures will be below 60°F (16°C) because it will not run often enough to maintain proper temperatures, and the refrigerator will develop high internal humidity.
For proper installation, the refrigerator/ freezer must be placed on a level surface of hard material the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator/freezer, or approximately 1,200 lbs. each. See the Installation Instructions for complete directions.
Clearances
If the refrigerator/freezer is to be installed in
a corner, a 4” clearance is required on the hinge side for a 90° door opening and access to fresh food drawers. A 15” clearance is required on the hinge side to remove pans. A 25” clearance is required on the hinge side for a full 130° door swing.
No other clearances at top, sides or back are required. See the Installation Instructions for complete directions.
Anti-tip bracket
The unit is
15