GE ZDWC240 owner manual To reverse the door

Page 13

Reversing the Door Swing

Wine Chiller

To reverse the door

Parts included:

1.Top left case hinge

2.Bottom left case hinge

3.Left and right side decorative hinge cover

4.Decorative hinge screw hole cover

5.Torx® driver bit

Tools required:

1.Phillips screwdriver

2.Electric drill

To remove the door:

1.Flatten the shipping carton to use as a pad.

2.Remove the 2 screws and the toekick. Set aside the screws and toekick for final installation.

3.Use the supplied Torx® bit and electric drill to remove the 3 screws holding the top case hinge. Lift off the hinge. (Screws will be used to install the new hinge.)

4.Lift the door off the bottom case hinge.

5.Remove the bottom case hinge pin and bracket.

Rotate the door:

The handle will be on the right side of the door; hinges will be installed on the left side of the case.

1.Remove the door stop and cam riser on the original bottom right side of the door.

2.Remove the fill plug on the top right side of the door.

3.Turn the door over and reinstall the fill plug on the new left side.

To reinstall the door:

1.Install the original door stop and cam riser onto the bottom left side of the door.

2.Install the new supplied bottom case hinge pin and bracket onto bottom left side.

Install

3 Hinge

Screws

Remove

Top Hinge

Hinge

Pin and

Bracket

Door Stop

and Cam Riser

Remove

Hinge

3.Place the door onto the bottom case hinge.

4.Install the supplied left-hand top case hinge with the 3 original screws.

5.Select the hinge cover marked with an “L”.

6.Peel backing off the tape inside the decorative hinge cover.

7. Press and snap the

Install Covers

hinge cover into

 

place.

 

8.Snap the screw hole cover into place on the opposite side.

Important: Check to be sure screws are tight and that the door is straight and does not sag. The door should swing freely.

NOTE: See Installation Instructions to apply hinge cover and screw hole cover.

Position nameplate:

Apply the Monogram nameplate on the door using the template included in the installation instructions.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Wine Chiller ZDWC240 Before using your wine chiller ContentsIntroduction Write down the model & serial numbersAfter installation is completed If you need serviceIf you received Damaged appliance Remove packagingRefrigerants Read and Save These InstructionsUSE of Extension Cords Before You Throw Away Your Old Refrigeration ProductRéfrigérants Lire ET Conserver CES InstructionsCordons Prolongateurs HOW to Connect Electricity Conservez CES Directives Raccordement ÉlectriqueInterior light and switch Temperature controlRemoving full extension drawers To removeLoading tips and suggestions Insert wine bottlesWood drawer fronts Bottle arrangementDrain hole Cabinet Glass door Cleaning the insideDoor gasket Event of a power failure Light bulb replacementProduct clearances Installation dimensionsTo reverse the door Normal operating sounds Problem SolverProblem Possible Cause Questions? Use this problem solver Problem SolverHOT AIR from Wine Storage and Handling Notes Appliance Notes GE Answer Center From the Date Original Purchase Your Monogram Refrigerator Warranty

ZDWC240 specifications

The GE ZDWC240 is a state-of-the-art water cooler that combines sleek design with cutting-edge technology, making it an ideal choice for home and office environments. Known for its efficient cooling mechanisms and user-friendly features, the ZDWC240 has become a popular choice among consumers seeking reliability and performance.

One of the standout features of the GE ZDWC240 is its dual temperature zones, which allow for the optimal storage of a variety of beverages, from wines to soft drinks. This dual-zone capability ensures that each type of drink is kept at its ideal temperature, enhancing flavors and preserving quality. Users can conveniently adjust the temperature for each zone according to their preferences, providing flexibility for different beverage types.

The ZDWC240 also boasts an impressive capacity, allowing it to hold multiple bottles without compromising space. The interior is designed with adjustable shelves, enabling users to customize the layout based on their storage needs. This feature is particularly useful for parties and gatherings when larger quantities of beverages need to be chilled simultaneously.

In terms of construction, the GE ZDWC240 is built with a durable stainless steel exterior that not only provides a modern aesthetic but also ensures long-lasting wear. The glass door features a UV-resistance coating, protecting the contents from harmful light exposure that can alter flavors and degrade quality over time.

Another significant aspect of the ZDWC240 is its energy efficiency. With a focus on sustainability, this water cooler is designed to minimize energy consumption while maintaining optimal performance. The use of advanced insulation technologies means that the cooler remains energy-efficient without sacrificing effectiveness.

Furthermore, it is equipped with an easy-to-use digital thermostat, which simplifies temperature adjustments. The LED display allows users to monitor their beverage temperature easily, while the silent cooling operation ensures minimal noise, making it suitable for quiet environments.

Overall, the GE ZDWC240 water cooler combines functionality, style, and efficiency into one remarkable appliance. Its diverse features cater to the needs of various consumers, making it an exemplary choice for anyone looking to enhance their beverage storage solutions. With its smart design and thoughtful technologies, the ZDWC240 stands out as a leader in the water cooler market, promising quality and satisfaction for all users.
Top Page Image Contents