GE JGP319 Care and cleaning of the cooktop, Lift-Up Cooktop, Porcelain Cooktop, Control Panel

Page 8

Safety Instructions

Care and cleaning of the cooktop.

Proper care and cleaning are important so your cooktop will give you efficient and satisfactory service. Follow these directions carefully in caring for it.

Before cleaning any part of your cooktop, be sure all burners are off and DISCONNECT ELECTRIC POWER TO THE COOKTOP at the fuse box or circuit breaker panel, or pull the cooktop power cord plug from the electric outlet, located on back wall below cooktop.

and Cleaning Operating Instructions

Lift-Up Cooktop

 

Clean the area under the cooktop often.

 

Built-up soil, especially grease, may catch

 

fire. To make cleaning under the top

 

easier, the top may be lifted up and

 

supported by a locking arm. After

Support rod

cleaning under the top with hot, soapy

water, lower the top back in place. Be

 

careful not to pinch your fingers.

To raise cooktop:

Be sure all burners are turned off and unit is cool. Remove cooktop burner bowls, grates and control knobs. Grasp cooktop at the front and lift up. Raise the support rod into place and hook it into the bracket on the underside of the cooktop to hold the cooktop while cleaning. Be sure to secure the cooktop support rod in the cooktop strike catch.

To lower cooktop:

Carefully replace the support rod and lower the cooktop. Press into place. Make sure the strikes fit in the catches to fasten the cooktop. Replace four surface units and control knobs.

Troubleshooting Tips Care

Porcelain Cooktop

The porcelain enamel finish is sturdy but breakable if misused.

This finish is acid resistant. However, any acidic foods spilled (such as fruit juices, tomato or vinegar) should not be permitted to remain on the finish.

If acids spill on the cooktop while it is hot, use a dry paper towel or cloth to wipe it up right away. When the surface has cooled, wash with soap and water or cleansing powders. Rinse well.

For other spills such as fat spatterings, wash with soap and water or cleansing powders after the surface has cooled. Rinse well. Polish with a dry cloth.

Customer Service

Control Panel

It’s a good idea to wipe the control panel clean after each use of the cooktop. For a more thorough cleaning, the knobs can be removed by pulling them off the knob stems. Clean with mild soap and water, rinse with clean water and polish dry with a soft cloth.

Do not use abrasive cleaners, strong liquid cleaners or oven cleaners on the control panel—they will damage the finish. A 50/50 solution of vinegar and hot water works well.

8

Image 8
Contents CooktopsBuilt-In Gas Important Safety Notice GE & You, a Service Partnership Congratulations You Are Now Part of The GE FamilySafety Precautions Cook Meat and Poultry THOROUGHLY… Read and follow this Safety Information carefully Using the cooktop burners How to Light a BurnerHow to Select Flame Size CookwareCare and cleaning of the cooktop Lift-Up CooktopPorcelain Cooktop Control PanelDrip Pans Control KnobsBurner Grates To replace burners Cooktop BurnersTo remove burners Air Adjustment Before You Call For Service… Safety Instructions Customer Service Troubleshooting Tips Care and Cleaning Built-In Cooktop Warranty GE Will Replace, At No Charge To YouWhat GE Will Not Cover One YearService Telephone Numbers GE Answer Center
Related manuals
Manual 64 pages 4.56 Kb

JGP320, JGP319 specifications

General Electric (GE) has long been a trusted name in home appliances, and their JGP319 and JGP321 gas cooktops are prime examples of modern kitchen ingenuity. Both models are designed with the home chef in mind, offering a blend of aesthetic appeal, technological advancements, and user-friendly features.

The GE JGP319 and JGP321 gas cooktops are equipped with four sealed burners, providing a range of cooking options for various culinary creations. The sealed burners not only enhance safety but also facilitate easy cleaning, as spills are contained within the burner area. The JGP319 model delivers up to 11,500 BTUs, while the JGP321 offers an impressive maximum output of 15,000 BTUs on its high-heat burner. This robust heat capacity allows users to achieve rapid boiling and swift cooking, making it ideal for busy kitchens.

Both cooktops feature heavy-duty cast iron grates, which offer superior durability and stability for pots and pans. The continuous grate design allows cookware to slide effortlessly from burner to burner, enhancing the cooking experience. This feature is particularly appreciated by chefs who often juggle multiple pots simultaneously.

In terms of aesthetics, the JGP319 and JGP321 are finished with a sleek stainless steel surface, which not only adds a modern touch to any kitchen but is also resistant to stains and easy to maintain. The low-profile design creates a seamless look that integrates well into any countertop, allowing for a polished appearance.

Safety is paramount in kitchen appliances, and GE does not compromise on this front. Both models come equipped with automatic reignition systems, ensuring that burners relight automatically if they are accidentally extinguished. Additionally, the cooktops feature a built-in cooktop timer, allowing users to monitor cooking times and avoid overcooking.

Another key characteristic of the JGP319 and JGP321 is their compatibility with a variety of cooking styles and preferences. They support a range of cookware types, including traditional pans as well as griddles and woks, ensuring versatility in meal preparation.

In conclusion, the GE JGP319 and JGP321 gas cooktops are exceptional choices for anyone seeking a reliable, stylish, and functional cooking solution. With their powerful burners, user-friendly design, and safety features, they stand out as industry leaders in the realm of gas cooktops. Whether you're a novice or a seasoned chef, these models are engineered to enhance your cooking experience, making them worthwhile investments for any kitchen.