PP932TM/KM/BM
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information (in inches)
KW Rating
240V | 8.6 |
|
|
208V | 6.5 |
|
|
Breaker Size | |
|
|
240V | 40 Amps† |
†Note: Check local codes for required breaker size
Important: Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a
Cooktop3-1/4*
13" MAX. depth
30" MIN. to unprotected cabinet
208V 40 Amps† |
48" flexible armored cable.
15" MIN. to cabinet
Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/ warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Profile™ Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening) use the following
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
2-1/2** 
Required
*Depth of unit at conduit connection location (rear) is
**Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.
Electrical junction box 16" MIN. below countertop
from
Cut should not interfere with cabinet structure at front
Listed by
Underwriters
Laboratories
Specification Revised 12/07 | 220585 |