Important Safety Instructions

Read all instructions before using this appliance.

When using electrical appliances, basic safety precautions should be followed, including the following:

•Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

•Use this appliance only for its intended use as described in this guide.

•Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.

•Do not attempt to repair or replace any part of your cooktop unless it is specifically recommended in this guide. All other servicing should be referred to a qualified technician.

•Before performing any service, DISCONNECT THE COOKTOP POWER SUPPLY AT THE HOUSEHOLD DISTRIBUTION PANEL BY REMOVING THE FUSE OR SWITCHING OFF THE CIRCUIT BREAKER.

•Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

•Do not allow anyone to climb, stand or hang on the cooktop.

•CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN CABINETS ABOVE A COOKTOP— CHILDREN CLIMBING ON THE COOKTOP TO REACH ITEMS COULD BE SERIOUSLY INJURED.

•Never wear loose-fitting or hanging garments while using the appliance. Be careful when reaching for items stored in cabinets over the cooktop. Flammable material could be ignited if brought in contact with hot surface unit and may cause severe burns.

• Use only dry pot holders—moist or

damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot surface

unit. Do not use a towel or other bulky cloth in place of a pot holder. Such cloths can catch fire on a hot surface unit.

•For your safety, never use your appliance for warming or heating the room.

•Do not store flammable materials near the cooktop.

•DO NOT STORE OR USE COMBUSTIBLE MATERIALS, GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

•Keep the hood and grease filters clean to maintain good venting and to avoid grease fires.

•Do not let cooking grease or other flammable materials accumulate on the cooktop.

• Do not use water on grease fires. Never pick up a flaming pan.

Turn the controls off. Smother a flaming pan on surface unit by

covering the pan completely with a well-fitting lid, cookie sheet or flat tray. Use a multi-purpose dry chemical or foam-type fire extinguisher.

Flaming grease outside a pan can be put out by covering it with baking soda or, if available, by using a multi-purpose dry chemical or foam-type fire extinguisher.

•Clean the cooktop with caution. If a wet sponge or cloth is used to wipe spills on a hot surface unit, be careful to avoid steam burns. Some cleansers can produce noxious fumes if applied to a hot surface.

NOTE: We recommend that you avoid wiping any surface unit areas until they have cooled and the indicator light has gone off. Sugar spills are the exception to this. Please see the Glass Cooktop Cleaning section.

When the cooktop is cool, use only the recommended cleaning cream to clean the cooktop.

•Do not operate the glass surface units if the glass is broken. Spillovers or cleaning solution may penetrate a broken cooktop and create a risk of electrical shock. Contact a qualified technician immediately should your glass cooktop become broken.

(continued next page)

Important Safety Instructions

164D2966P161-1, JP660 specifications

GE JP660,164D2966P161-1 is a remarkable gas turbine engine that stands out for its high efficiency and reliability in power generation. This engine is primarily utilized in various industrial applications such as electrical generation, natural gas processing, and oil extraction. The JP660 series particularly incorporates advanced technologies that enhance its performance and operational flexibility.

One of the key features of the GE JP660 is its modular design, which simplifies maintenance procedures and reduces downtime during service intervals. This design philosophy not only enhances its reliability but also makes it easier for operators to perform routine inspections and repairs. The engine is capable of achieving high thermal efficiency levels, leading to reduced fuel consumption and a lower carbon footprint, making it an eco-friendly option for energy production.

In terms of technology, the JP660 is equipped with advanced controls and monitoring systems that allow for precise management of the engine's performance, optimizing combustion and improving overall operational efficiency. These integrated systems facilitate remote diagnostics, enabling operators to monitor performance metrics in real time, ensuring that any potential issues are addressed promptly.

The turbine’s materials are engineered for durability and performance, utilizing advanced alloys and coatings that resist high temperatures and corrosive environments. This material technology enhances the overall lifespan of the engine, significantly reducing the need for replacement parts and associated costs.

Another notable characteristic is the turbine’s ability to operate on various fuel types including natural gas, diesel, and biofuels. This flexibility makes it a valuable asset in regions where fuel availability may vary or where specific environmental regulations require diversification of fuel sources.

Additionally, the JP660 is designed with a high power-to-weight ratio, enabling it to deliver substantial output while maintaining a compact footprint. This is particularly advantageous for installations where space is limited.

Overall, the GE JP660,164D2966P161-1 engine exemplifies cutting-edge technology and robust engineering, making it a reliable choice for modern energy demands. Its blend of efficiency, flexibility, and advanced features positions it as a leading solution in the competitive landscape of gas turbine engines.