Operating Instructions, Cleaning Instructions

16906206EFM1.qxd 6/2/06 8:28 AM Page 5

OPERATING INSTRUCTIONS

Before plugging in your BUFFET RANGE, check to ensure that the electrical circuit is not overloaded with other appliances. This unit should always be operated on a separate 120 volt, 60 Hz, AC circuit . Be certain that your BUFFET RANGE is resting level on the countertop. There are 2 burner rings on this unit . The larger burner is rated at 900 watts. The smaller burner is rated at 600 watts. Use the larger burner for fast cooking, and use the smaller burner for simmering or warming.

NOTE: Avoid using pans that are unstable and easily tipped.

1.Place unit on a flat surface.

NOTE: Be sure to leave 4 to 6 inches of space above and around the unit for proper ventilation.

2.Plug unit into electrical outlet . Turn Temperature Control Dials from OFF ( ) to selected setting (I = Low, II = Medium, III = High). The Indicator Light will glow when the burner is ON.

CAUTION: Do not touch while in use.

3.When using a pot or pan, place it in the center of the burner. It is recommended that you use a pot or pan that is the same size as the burner.

4.When cooking is complete turn Temperature Control Dial(s) to the OFF position. The Indicator Light will stop glowing when the burner is OFF.

5.When not in use, unplug unit to assure that it is off. This helps prevent accidental burns.

IMPORTANTPOINTSTOREMEMBER

WHENOPERATING

•Before the BUFFET RANGE is used for the first time, it should be heated up at maximum setting for approximately 4 minutes without a pot . During this curing process, the protective coating is hardened and obtains its maximum strength.

•The BUFFET RANGE may smoke the first time it is used – it is not defective and the smoke will burn off within a few minutes.

•Do not leave the unit ON without any pots/pans on the Solid Burners after the curing process.

•Do not use as a portable heater.

•Make sure the power supply cord does not touch hot elements or cooking utensils.

•For daily cooking, wipe excess water/condensation off pots, lids and utensils prior to use.

•Make sure that hot pots/pans do not touch the Housing Unit – these could damage the surface finish.

•The larger burner is rated at 900 watts. The smaller burner is rated at 600 watts. Use the larger burner for fast cooking, and use the smaller burner for simmering or warming.

CLEANING INSTRUCTIONS

Reasonable care will ensure many years of service from your unit . Avoid dropping items on the Burner Rings and Solid Burners.

1.Turn Temperature Control Dial(s) OFF.

2.Always unplug unit from electrical outlet and allow to cool before cleaning.

3.NEVER IMMERSE UNIT IN WATER OR OTHER LIQUIDS.

4.For easy cleaning, the Burners are sealed. Do not attempt to separate Burners from the unit .

5.Use a damp, soapy cloth or sponge to clean the surface of the Solid Burners, Burner Rings, Non-Skid Feet and Housing Unit . NEVER USE HARSH ABRASIVE OR STEEL WOOL PADS ON ANY PART OF THE BURNER.

6.Thoroughly wipe soap from Solid Burners and Burner Rings.

7.There are no user serviceable parts. Any servicing other than cleaning should be performed by an authorized service center.

169062, 681131690621 specifications

The GE 681131690621,169062 is a notable product in the realm of energy solutions, representing a significant advancement in technology and efficiency. This model is primarily designed for applications requiring reliable power generation and robust performance, making it suitable for various industrial and commercial settings.

One of the standout features of the GE 681131690621,169062 is its cutting-edge generator technology. It incorporates high-efficiency components that optimize energy conversion, allowing for improved fuel utilization and lower operational costs. This feature is particularly beneficial for organizations looking to minimize their carbon footprint while maximizing productivity.

Another characteristic of the GE 681131690621,169062 is its modular design, which simplifies installation and maintenance. The modular architecture enables users to tailor the system to specific operational needs, ensuring scalability and adaptability. Additionally, this design approach reduces the downtime associated with maintenance, enhancing overall system reliability.

The GE 681131690621,169062 also integrates advanced control systems that facilitate real-time monitoring and performance optimization. This technology allows operators to track crucial performance metrics, ensuring that the system operates within optimal parameters. The availability of advanced diagnostics further aids in predictive maintenance, reducing unforeseen failures and improving overall system longevity.

In terms of safety and compliance, the GE 681131690621,169062 meets or exceeds industry standards for emission control and operational safety. Its design includes features aimed at minimizing environmental impact and enhancing workplace safety, making it a responsible choice for today's environmentally conscious enterprises.

Furthermore, the GE 681131690621,169062 is compatible with various fuels, including natural gas and diesel, offering flexibility in terms of fuel sourcing. This adaptability not only helps in achieving cost-effective operations but also allows businesses to transition towards more sustainable energy sources over time.

Overall, the GE 681131690621,169062 stands out due to its innovative technology, user-centric design, and commitment to sustainability. It represents a comprehensive solution for organizations seeking reliable and efficient power generation with the added benefit of advanced monitoring and control capabilities. As industries continue to evolve, the GE 681131690621,169062 provides an essential tool for meeting energy demands responsibly and efficiently.