GE ZBD1870NSS Installation Instructions, Prepare HOT Water Line, Check Door Balance

Page 6

Installation Instructions

PREPARE HOT WATER LINE

•The line may enter from either side, rear or floor within the shaded area shown in Figure F.

•The line may pass through the same hole as the electrical cable and drain hose. Or, cut an additional 1-1/2" dia. hole to accommodate the water line. If power cord with plug is used, water line must not pass through power cord hole.

CAUTION:

The hot water supply line pressure must be at least 20 psi. Lower pressures could cause the water valve to leak and cause water damage.

 

BEFORE YOU BEGIN

STOP

Locate and set aside the package containing

2 Phillips head countertop mounting screws

 

 

and 2 additional toekick screws (located in

 

the literature package).

STEP 1 CHECK DOOR BALANCE

•To check the door balance, hold the top of the dishwasher firmly.

•Open the door slowly. If the door drops when released, you will need to increase spring tension. If the door closes when released, you will need to decrease tension.

•If adjustments are needed, see Step 1A. If no adjustments are needed, skip to Step 2.

Shut-off

1-1/2" Dia.

Valve

Hole

 

Hot

 

2"

 

From

18" From Wall

Cabinet

 

STEP 1A ADJUST DOOR SPRINGS

(IF NECESSARY)

FOR ZBD1870 MODELS

For ZBD1850 models, refer to the instruction provided on the template packed with that model.

To adjust the door springs, you will need to remove the dishwasher side panels.

Cabinet Face

Figure F

3" From Floor

To remove the side panels:

• Remove the screws from the top and back of each

dishwasher side panel, sixteen screws total. Open the door

Water Line Connection

•Turn off the water supply.

•Install a hand shut-off valve in an accessible location, such as under the sink. (Optional, but strongly recommended and may be required by local codes.)

•Water connection is on the left side of the dishwasher. Install the hot water inlet line, using no less than 3/8" O.D. copper tubing. Route the line as shown in Figure F and extend forward at least 18" from rear wall.

•Adjust water heater for 120°F to 150°F temperature.

•Flush water line to clean out debris.

•The hot water supply line pressure must be 20-120 PSI.

CAUTION:

Opening the door will cause the dishwasher to tip forward. Do not open the door until you are ready

to install the dishwasher. If it is necessary to open the door, hold the top of the dishwasher securely with one hand and hold the door with the other hand.

and remove the four screws securing the panels to the inside

door frame.

Screws

Screws

ScrewsScrews

Screws

Front

Rear

Figure G

Figure H

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Nsta l l ati on nstru cti ons Built-In Dishwashers ZBD1850 ZBD1870Safety Information ContentsRead Carefully Keep These Instructions Materials YOU will Need Installation PreparationParts Supplied Tools YOU will NeedDetermine Drain Method Prepare Dishwasher EnclosureDrain Requirements Cabinet PreparationElectrical Requirements Prepare Electrical WiringGrounding Instructions-Power Cord Models Grounding Instructions-Cable DirectPrepare HOT Water Line Installation InstructionsAdjust Door Springs If Necessary For ZBD1870 Models Check Door BalanceTo adjust the door springs Figure JInstall 90 Elbow Adjust Leveling LegsInstall Power Cord Skip this step if dishwasher will be direct wiredInstall Drain Hose Through Cabinet Slide Dishwasher Partially Into CabinetPosition Dishwasher Under Countertop Top ViewLevel Dishwasher Granite Countertop Plug Buttons ScrewsConnect Drain Line Drain Line InstallationConnect Water Supply Method 2 Drain Hose RoutingConnect Power Supply Pretest Check ListDishwasher WET Test Replace ToekickLiterature

ZBD1870NSS specifications

The GE ZBD1870NSS dishwasher represents an impressive blend of functionality and modern design, tailored to elevate the kitchen experience. It is part of GE's well-regarded line of small space appliances, making it a perfect solution for urban dwellers or those with compact kitchens.

This model boasts a sleek stainless steel finish, giving it a contemporary look that complements various kitchen decors while also ensuring durability and easy maintenance. Its compact size doesn’t sacrifice capacity, as it can hold up to eight place settings. This functionality makes it versatile for both small gatherings and everyday use.

One of the standout features of the GE ZBD1870NSS is its advanced wash system. The dishwasher utilizes a high-efficiency washing technology that covers all angles, ensuring thorough cleaning while reducing water usage. The system is equipped with multiple wash cycles, including a dedicated cycle for delicate items and a heavy-duty cycle designed for tackling tough stains and baked-on residues.

In addition to its impressive cleaning capabilities, the GE ZBD1870NSS incorporates a sophisticated drying system. The stainless steel interior promotes optimal drying performance and helps to reduce the incidence of spots. Furthermore, it features a heated dry option that speeds up the drying process, making it a convenient choice for busy households.

The dishwasher also boasts a convenient top control panel for seamless operation and easy access. Users can choose from various settings with just a touch, ensuring that each load can be customized based on specific needs. The delayed start option is another thoughtful addition, allowing users to program the machine to operate at a more convenient time.

Energy efficiency is another critical aspect of the GE ZBD1870NSS. The appliance is ENERGY STAR certified, meaning it meets strict criteria for energy consumption, which translates into savings on utility bills and a lower environmental footprint.

Noise levels are considered during the design, and the GE ZBD1870NSS operates at a quiet 55 decibels, ensuring that it won’t disrupt daily activities or conversations in the kitchen.

In summary, the GE ZBD1870NSS combines practical features with modern technology, making it an appealing choice for those seeking an efficient, stylish, and reliable dishwasher. Its compact design, advanced wash system, and energy-efficient operation are just a few highlights that set it apart in the market.
Top Page Image Contents