GE GSM2200N dimensions Rough-In for Installation with Disposer Dimensions, Inches

GSM2200N

GE Spacemaker® Under-the-Sink Dishwasher

Note: A close-fitting elbow or special shallow sink strainer is necessary to provide clearance between sink drain and dishwasher. Dishwasher furnished with 1/2" I.D. drain hose, 78" long. If using copper tubing, 2" length of 1/2" I.D. rubber hose must be provided to connect copper tubing to pump outlet. Disposer should have 7/8" I.D. dishwasher drain connector.

Rough-In for Installation with Disposer Dimensions	Rear View Plumbing Arrangement Dimensions
(in inches)	(in inches)

			Waste air gap	6" Double-bowl			Sink	Countertop
				stainless steel sink			strainer
			To				assembly	25" deep
								1-1/2" thick
			air	GFC290/300/700
			gap
Directional flow tee				Disposall®				1-1/2" Close
				unit
FRONT VIEW			Waste tee	1-1/2"				elbow
		Drain		Directional		Spacemaker®
4	connection		or disposer	flow tee		dishwasher
		1-1/2" MAX.	Remove hopper plug	Cold water
		dia. hole	before connecting
			dishwasher drain	Hot water				Dishwasher
				Valve to shut off
		12" From wall		water to dishwasher				water inlet
6				Hot water supply	Dishwasher		Electrical	valve
				to dishwasher			junction box
					drain hose		(on dishwasher)
10"		Allow a 5"
from
cabinet		radius to
		prevent kinking

Listed by Underwriters Laboratories

As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency.

Specification Created 4/07 350511