Flashing display lights, Using the dishwasher

About the dishwasher control panel.

Safety Instructions

5Start

Close the dishwasher door and select the cycle and desired enhancements. Touch the START/RESET pad to begin the cycle. Water fill begins, and approximately 60 seconds later the wash action begins.

NOTE: The dishwasher remembers your last cycle so you don’t have to reprogram each time. When the dishwasher door is fully closed, the control panel lights will display the last settings you selected.

6Clean

The CLEAN light is illuminated when a wash cycle is complete. The light will stay ON until the door is opened and then closed and latched or when a pad is pressed with the door closed. You can turn off the CLEAN light by pressing any pad when the door is latched.

If you don’t want to change any of the settings, simply touch the START/RESET pad to begin the cycle.

If the door is closed, the indicator lights will turn

off if the START/RESET pad is not selected within two minutes. To activate the display, open and close the door or press any pad.

Also, if a power failure occurs, NORMAL and HEATED DRY will automatically be programmed. Make any new selections and touch the START/RESET pad to begin the cycle.

Operating Instructions

Troubleshooting Tips

Flashing display lights.

	Status Indicator Lights	What It Means
	START/RESET	Cycle has been interrupted by pressing the START/RESET pad. Light will stop
		flashing after the dishwasher automatically drains out the water.
Using the dishwasher.

Check the Water Temperature

The entering water should be at least 120°F and not more	the dishwasher, place the thermometer in a glass and let
than 150°F for effective cleaning and to prevent dish	the water run continuously into the glass until the
damage. Check the water temperature with a candy or	temperature stops rising.
meat thermometer. Turn on the hot water faucet nearest

Use Jet-Dry ® or Cascade Crystal Clear® Rinse Agent

Jet-Dry®or Cascade Crystal Clear® rinse agents remove spots and prevent new film buildup on your dishes, glasses, flatware, cookware and plastic.

Filling the Dispenser

The rinse agent dispenser holds 3.5 oz. of rinse agent. Under normal conditions, this will last approximately one month. Try to keep it full, but do not overfill.

1 Make sure the dishwasher door is fully open.

2 Turn the dispenser cap to the left and lift it out.

3 Add rinse agent until the indicator window looks full.

4	Clean up any spilled rinse agent with a damp cloth.	Indicator
5	Replace the dispenser cap.	window	Dispenser cap
5	Replace the dispenser cap.

Support

Rinse Aid Setting

The amount of rinse agent released into the final wash can be adjusted. The factory setting is at the midpoint. If there are rings of calcium (hard water) spots on dishes, try a higher setting. If you see foam in the dishwasher, move the indicator to a lower setting.

To adjust the setting

Remove the dispenser cap; then turn the adjuster counterclockwise to increase the amount of rinse agent, clockwise to reduce the amount of rinse agent.

Rinse agent adjuster

Consumer

Dish Preparation Prior to Loading

	■ No prerinsing of normal food soil is required.	■ Remove leafy vegetables, meat trimmings and
	■ Scrape off hard soils, including bones, toothpicks, skins	excessive amounts of grease or oil.
6	and seeds.	■ Remove acidic food soils that can discolor stainless

■ Remove large quantities of any remaining food.	steel.

GSD6900 specifications

The GE GSD6900 is a prominent model in General Electric's line of dishwashers, known for its combination of efficiency, innovation, and user-friendly features. This dishwasher is designed to cater to the needs of modern households, delivering high performance while maintaining energy efficiency and sustainability.

One of the standout features of the GE GSD6900 is its innovative wash system. Equipped with a powerful wash motor, it ensures a thorough cleaning of dishes, pots, and pans with minimal water usage. The unit boasts multiple wash cycles, including an intensive wash for heavily soiled items, a quick wash for when time is of the essence, and an Eco wash option that prioritizes water and energy savings.

The dishwasher features a spacious interior designed to accommodate a variety of dish sizes and types. With adjustable racks, users can easily configure the interior space to fit large baking dishes or odd-shaped items. The unit also includes a third rack, which is a great addition for managing utensils, keeping them separated and organized during the wash cycle.

The GE GSD6900 leverages advanced cleaning technologies such as Steam Prewash, which helps dissolve tough food residues before the main wash cycle begins. This feature enhances cleanliness and reduces the need for pre-rinsing dishes. Additionally, the dishwasher utilizes Smart Soil Sensors to detect the level of soil in the water, adjusting cycle times and water usage accordingly for maximum efficiency.

Noise levels are often a concern with dishwashers, but the GSD6900 operates quietly, thanks to its insulation and advanced motor technology. Users can run the dishwasher even during social gatherings without the distraction of annoying noise.

Moreover, the dishwasher integrates user-friendly controls, featuring a straightforward interface that allows for easy selection of cycles and options. The delayed start function provides flexibility, letting users schedule washes during off-peak hours or when they are away from home.

In summary, the GE GSD6900 is a well-rounded dishwasher that combines efficiency, advanced cleaning technologies, and practicality. Its thoughtful design and versatile features make it a valuable addition to any kitchen, ensuring clean dishes while being mindful of energy and water consumption. This model exemplifies GE's commitment to delivering appliances that simplify routine tasks while promoting sustainability.