GE ZBD1800 Check Water Temperature Using the Dishwasher, Use a Rinse Agent, Forget to Add a Dish?

Page 8

Check

the Water

Temperature

 

Using the Dishwasher

 

 

 

 

 

Dishwasher

 

 

The entering water should be at least 120°F and

Turn on the hot water faucet nearest the

not more than 150°F, for effective cleaning and

dishwasher, place the thermometer in a glass

to prevent dish damage. Check the water

and let the water run continuously into the glass

temperature with a candy or meat thermometer.

until the temperature stops rising.

Use a Rinse Agent

A rinse agent improves dry performance, reduces spots and prevents new film buildup on your dishes, glasses, flatware, cookware and plastic. Jet-Dry®and Cascade Crystal Clear® are recommended rinse agents for Monogram Dishwashers.

Filling the Dispenser

The rinse agent dispenser holds 3.5 oz. of rinse agent. Under normal conditions, this will last approximately one month. Try to keep it full, but do not overfill.

1.Make sure the dishwasher door is fully open.

2.Turn the dispenser cap to the left and lift it out.

3.Add rinse agent until the indicator window looks full.

4.Clean up any spilled rinse agent with a damp cloth.

5.Replace the dispenser cap.

Rinse Aid Setting

The amount of rinse agent released into the final wash can be adjusted. The factory setting is at the midpoint. If there are rings of calcium (hard water) spots on dishes, try a higher setting. If you observe foam in the final rinse, try a lower setting.

To adjust the setting, remove the dispenser knob; then turn the adjuster counterclockwise to increase the amount of rinse agent or clockwise to reduce the amount of rinse agent dispensed.

Indicator

n

M

a

i

x

M

 

Adjustable setting

Dispenser cap

Forget to Add a Dish?

A forgotten dish can be added any time before the main wash.

1.Unlatch the door to interrupt the cycle. Squeeze the door latch to release the door.

2.Do not open the door until the water spray action stops. Steam may rise out of the dishwasher.

3.Add forgotten dishes.

4.Close the door and push it in to relatch.

8

Image 8
Contents Dishwasher Ge.comContents IntroductionBefore using your dishwasher Save time & money If you Need serviceWrite down the model & serial numbers If you received Damaged dishwasherProper Installation and Maintenance Proper Disposal of the Dishwasher Before You Throw Away Your Old DishwasherFeatures Control Settings Cycle Sequence Control PanelWash Cycles Water Time Cycles Approx Cycle SequenceCheck Water Temperature Using the Dishwasher Rinse Aid SettingUse a Rinse Agent Forget to Add a Dish?Using the Dishwasher DetergentsNumber Grains Detergent Cups to Fill Do not use hand dish detergentUpper Rack Lower Rack DishwasherSilverware Basket Loading the RacksWithout the topper With the topperWood Panel Trim Kit Optional Accessories Care and Cleaning Cleaning the Door PanelCleanSteel Door Panel model numbers ending in CS ExteriorSpray Arms and Filters Cleaning the Spray ArmsCleaning the Filters Air gap is easy to clean Protect Against FreezingDoes Your Dishwasher Have an Air Gap? Stainless Steel Interior Tub Inner DoorQuestions? Use this problem solver Before You Call For ServiceNot clean Dishes and flatwareSpots and filming on Use Jet Dry or Cascade Crystal Clear rinseYellow or brown film On inside surfacesWhite film on inside SurfacesWarranty From the Date Original PurchaseConsumer Services Service ContractsDishwasher Dishwasher We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration

ZBD1800 specifications

The GE ZBD1800 is a cutting-edge digital X-ray imaging system designed specifically for advanced diagnostic applications. This innovative system merges versatility and high performance, catering to the needs of healthcare professionals and enhancing patient care. One of its standout features is the ability to produce high-resolution images with reduced radiation exposure, ensuring that patients receive optimal care while maintaining safety.

One of the core technologies behind the ZBD1800 is its digital detector. This device captures images with exceptional clarity and detail, allowing radiologists to identify subtle abnormalities that might be overlooked with conventional X-ray systems. The system is equipped with a flat-panel detector that possesses high sensitivity and excellent dynamic range, facilitating clear imaging across various patient sizes and conditions.

The ZBD1800 also incorporates advanced image processing algorithms that enhance image quality and detail. These algorithms reduce noise and improve contrast in the images, which assists medical professionals in making more accurate diagnoses. Furthermore, the system offers real-time imaging capabilities, allowing for instant feedback during examinations. This feature significantly streamlines the workflow in busy radiology departments, saving valuable time.

In terms of usability, the GE ZBD1800 is designed with healthcare providers in mind. Its intuitive user interface simplifies operation, making it easy for radiologists and technicians to navigate and utilize the system effectively. The system also provides customizable imaging protocols, enabling facilities to tailor the imaging process to their specific needs and preferences.

Another notable characteristic of the GE ZBD1800 is its comprehensive connectivity features. The system supports seamless integration with hospital information systems (HIS) and radiology information systems (RIS), ensuring that patient data and images can be efficiently stored, accessed, and shared. This interoperability enhances collaboration among healthcare teams and contributes to improved patient outcomes.

Overall, the GE ZBD1800 represents a significant advancement in digital X-ray technology. By blending high image quality, reduced radiation exposure, user-friendly design, and robust connectivity, it stands as an invaluable tool for modern diagnostic imaging. Healthcare facilities looking to enhance their imaging capabilities and patient care will find the GE ZBD1800 a reliable and effective choice.