Loading the dishwasher racks | GE Stainless Steel Tub Dishwasher

Instructions

Loading the dishwasher racks.

For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.

Safety

Operating Instructions

Upper Rack

Although the upper rack is primarily for glasses, cups and saucers, pots and pans can be placed in this rack for effective cleaning. Cups and glasses fit best along the sides. This is also a secure place for dishwasher plastics.

The utility shelf (some models) may be placed in the up or down position to add flexibility. A wine glass holder (some models) secures wine glasses for best washability.

Some models have contoured metal cup shelves that can secure up to 12 wine glasses (as shown).

Because wine glasses come in various sizes, after loading, slowly push in the rack to make sure they will clear the top of the dishwasher.

Some models have an Angled Rack System, which allows you to angle your dishes, such as coffee mugs, for better cleaning and quicker drying. To position the tines, pull the lever forward then drop the tines into position, then release the lever.

The upper rack is good for all kinds of odd-shaped utensils. Saucepans, mixing bowls and other items should be placed face down. Fold-down tines (on some models) provide flexibility for extra-large and hard- to-fit items.

Secure larger dishwasher-safe plastics over 2 tines when possible.

Make sure small plastic items are secure so they can’t fall onto the heater.

Be sure that items do not protrude through the bottom of the rack and block rotation of the middle spray arm. This could result in poor wash performance for items in the upper rack.

Check to make sure that no items will block rotation of the wash arm.

NOTE: The Single Rack Wash selection, on models with this feature, washes the upper rack only. If you use this feature, do not load items in the lower rack.

Troubleshooting Tips

Support

Adjustable Upper Rack

The standard position of your adjustable rack is “up” which allows for maximum clearance for your taller items in the lower rack. If you have taller wine glasses, tumblers or other items to place in the upper rack, you may want to adjust the rack to the lower position.

To lower the rack, support the weight of the rack with your hands as shown and press both finger pads about 1/4″ toward the inside of the rack as indicated and guide the rack down to its lower position.

To raise the rack to the “up” position, pull up on the center of the rack side frame until the rack locks into place.

Lower Rack

Consumer

	The lower rack is best used for plates, saucers
	and cookware. Large items such as broiler
	pans and baking racks should go along the
	left-hand side. Load platters, pots and bowls
	along the sides, in corners or in the back. The
	soiled side of items should face the center of
	the rack. If necessary, oversized glasses and
12	mugs can be placed in the lower rack to
12	maximize loading flexibility.

Also, be careful not to let a portion of an item such as a pot or dish handle extend through the bottom rack. This could block the wash arm and cause poor washing results.

Fold-down tines (on some models) provide flexibility for extra-large and hard-to-fit items. The tines may be left in the up position or folded down to customize the lower rack.

Stainless Steel Tub Dishwasher specifications

The GE Stainless Steel Tub Dishwasher stands out in the competitive landscape of modern kitchen appliances, offering a combination of advanced features, state-of-the-art technologies, and solid performance.

One of the most notable characteristics of this dishwasher is its sleek stainless steel tub, which not only enhances its aesthetic appeal but also optimizes washing performance. The stainless steel construction is resistant to corrosion and staining, ensuring longevity and maintaining the dishwasher's attractive appearance over time. This material also improves thermal efficiency, helping to retain heat during the wash cycles for better cleaning results.

In terms of features, the GE Stainless Steel Tub Dishwasher is equipped with an impressive array of wash cycles. From the heavy-duty options designed for pots and pans to gentle cycles for delicate glassware, users have the flexibility to select the most appropriate settings for their specific needs. Additionally, the dishwasher includes a quick wash cycle for users in a rush, ensuring that dishes are clean and ready in no time.

One of the standout technologies in this model is the Smart Wash System, which uses sensors to determine the optimal wash cycle based on the soil level of the dishes. This intelligent approach not only delivers effective cleaning but also conserves water and energy. Coupled with the ENERGY STAR certification, the dishwasher is designed to minimize its environmental impact while delivering excellent service.

Another key characteristic is the adjustable upper rack, which provides added versatility for loading a variety of dishware sizes and shapes. This feature allows users to maximize the dishwasher's capacity, accommodating larger items such as baking sheets without compromising the washing efficiency of other dishes.

The dishwasher also boasts a quiet operation, with a sound rating that allows for seamless use even in open-concept living spaces. This is particularly beneficial for households where mealtime and cleanup occur in proximity to living areas.

With its combination of advanced features, intelligent technologies, and user-friendly design, the GE Stainless Steel Tub Dishwasher is a reliable choice for those seeking a high-performance appliance that simplifies the dishwashing process while enhancing the overall kitchen experience.

Instructions