Safety Instructions, Status Indicator Lights, Cycles

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

About the dishwasher control panel. (For models with sensor: EDW6000 Series,

GHDA600 Series, GLD6000 Series)

You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model.

	1
3	5	4	2

Control Settings

1Status Indicator Lights

The Status display tells you what’s happening while the dishwasher is in operation and may flash, indicating a malfunction (see page 8). The lights will come ON indicating the sequence of operation the dishwasher is in.

SENSING	Displayed while the sensor is measuring the amount of soil and temperature of water.
(on some models)	The dishwasher will adjust the selected cycle to achieve optimal performance.

WASHING Displayed during prewash and main wash periods. (on some models)

RINSING Displayed during rinse periods. (on some models)

DRYING Displayed during HEATED DRY. (on some models)

SANITIZED Displayed when cycle has met sanitization conditions. Light remains ON until door is opened.

CLEAN Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are clean until the door is relatched or until another cycle is selected.

2Time Remaining Display (on some models)

During operation, the display shows the minutes remaining until the cycle is complete. The display may adjust the remaining time while the sensing light is on. The time displayed at the start of each cycle may change from the factory setting as the unit customizes itself to home use. During a delay start, the display will show hours of time remaining until the cycle starts.

3	Cycles
	The light above the selected pad will be ON to indicate which cycle has been selected.

This dishwasher is equipped with a dirt and temperature sensor. Cycle length and time will vary depending on the soil level and temperature.

ANTI-BACTERIA	Heavy 8.5 gal., 84 min.
or SANI WASH	Medium 7.3 gal., 78 min.
	Light 6.1 gal., 75 min.

This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle length will vary depending on the temperature of your inlet water.

NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is interrupted during or after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the sanitized light will not illuminate at the end of the cycle.

NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.

POTS	Heavy 10.9 gal., 102 min.
& PANS	Medium 8.5 gal., 78 min.
	Light 7.3 gal., 73 min.

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils.

Everyday dishes are safe to be used in this cycle.

	NORMAL WASH Heavy 8.5 gal., 65 min.
	Medium 7.3 gal., 60 min.
4	Light 4.9 gal., 49 min.
4

This cycle is for medium/heavily soiled dishes and glassware.

EDW4000, GLD5000, GLD6000, GHDA600, GLD4000 specifications

The GE GLD4000, GHDA600, GLD6000, GLD5000, and EDW4000 models are part of GE's innovative portfolio of industrial and commercial power generation solutions. Each model boasts a unique set of features and technologies designed to meet specific operational needs and efficiency standards in the power generation sector.

Starting with the GE GLD4000, this model is renowned for its high reliability and versatility in various applications. Equipped with advanced digital controls, the GLD4000 integrates seamlessly into existing infrastructure. It features exceptional fuel efficiency and can operate efficiently across different fuel types, including natural gas and diesel. The compact design allows for simplified installation and maintenance, making it a preferred choice for businesses aiming to reduce downtime and operating costs.

Moving on to the GHDA600, this model emphasizes robustness and durability, designed for rugged environments. The GHDA600 is particularly suited for remote locations where traditional power sources may be unavailable. With its integrated thermal management system, it can operate reliably even in extreme temperatures. The unit’s modular design allows for scalability, enabling customers to expand power capabilities as their needs grow.

The GE GLD6000 stands out in the lineup for its high performance and energy output. This model includes advanced monitoring systems that provide real-time data analytics, enhancing operational efficiency. The GLD6000 is engineered for low emissions and adheres to stringent environmental standards. Its advanced cooling and lubrication technologies ensure optimal performance while minimizing wear and tear.

In contrast, the GLD5000 emphasizes flexibility and customization. This model can be tailored to meet specific operational requirements, making it suitable for a wide range of applications, from industrial plants to commercial buildings. Enhanced connectivity features allow for remote monitoring and management, giving operators greater control over performance metrics and energy consumption.

Lastly, the EDW4000 is designed for emergency and backup power applications. It features quick start capabilities and robust energy storage options to ensure power delivery during outages. The unit’s design prioritizes safety and reliability, with advanced fire suppression and environmental protection measures. Its compact footprint makes it ideal for urban settings where space is at a premium.

Together, these GE models represent a comprehensive approach to energy solutions, combining innovative technology, efficiency, and adaptability to meet diverse power generation needs across various industries.