GE GLDA690, GLDA696 owner manual About the dishwasher control panel, Wash Cycles, Options

Page 4

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

About the dishwasher control panel.

Throughout this manual, features and appearance may vary from your model.

 

5

4

1

3

2

Control Settings

1Wash Cycles

POTS & PANS 7.4 gal., 85 min.

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.

NORMAL WASH 5.3 gal., 56 min.

This cycle is for medium/heavily soiled dishes and glassware.

LIGHT WASH 4.2 gal., 33 min.

This cycle is for lightly soiled dishes and glassware.

RINSE ONLY 2.1 gal., 7 min.

This cycle is for rinsing partial loads that will be washed later.

DO NOT use detergent or HEATED DRY Option with this cycle.

2Options

The light above the selected pad will be ON to indicate which OPTION has been selected.

HEATED DRY Turns the heater on for fast drying. This will extend the total cycle time by approximately Light ON 38 minutes for a NORMAL WASH cycle.

NOTE: Cannot be selected with RINSE ONLY cycle.

HEATED DRY Shuts off the drying heat option. Dishes will air dry naturally to save energy.

Light OFF

HOT WASH When selected, the cycle will run a little longer with heated elements on to improve both wash and dry performance. Adds approximately 15 minutes to the cycle.

NOTE: Cannot be selected with RINSE ONLY cycle.

HOT START For use with heavily soiled and/or dried-on, baked-on soils. This option MUST be selected PRIOR to starting the cycle. This option adds approximately 22 minutes to the cycle and two additional rinses to the cycle.

NOTE: Cannot be selected with RINSE ONLY cycle.

LOCK You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle.

Children cannot accidentally start dishwasher by touching pads with this option selected.

To unlock the dishwasher controls, press and hold the HEATED DRY pad for 3 seconds.

The light above the lock pad will turn off. To lock the dishwasher, press and hold the

HEATED DRY pad for 3 seconds. The light above the LOCK pad will turn on.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Dishwashers Proper Installation and Maintenance Proper Disposal of the Dishwasher Ge.comWash Cycles About the dishwasher control panelOptions Clean Start/ResetTime Remaining Display on some models Using the dishwasher Rinse Aid SettingTo adjust the setting Filling the DispenserProper Use of Detergent NumberLoading the dishwasher racks Upper RackLower Rack Silverware BasketCleaning the Exterior Door Panel Cleaning the Control PanelCaring for the dishwasher Stainless Steel Interior-Tub and Inner DoorProtect Against Freezing Spray Arms and FiltersDoes Your Dishwasher Have an Air Gap? Before you call for service… Make sure inlet water temperature is at least 120F Is tripped Circuit Power is turned offDetergent left Dishes are blocking Dispenser cups Detergent cupPage Page GE Dishwasher Warranty For The Period Of GE Will ReplaceWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

GLDA696, GLDA690 specifications

The GE GLDA690 and GLDA696 are advanced gas detection systems designed for industrial and commercial applications. These models prioritize safety and efficiency, making them essential tools for facilities that manage flammable and toxic gases.

One of the standout features of the GLDA690 and GLDA696 is their robust sensor technology. They utilize advanced electrochemical sensors that provide reliable detection of hazardous gases at ultra-low concentrations. This is crucial in industries where even minute traces of gas can pose significant risks. The sensors are designed for long-term stability and can tolerate a range of environmental conditions, enhancing their reliability in various settings.

Both models come equipped with a user-friendly interface that simplifies the monitoring process. The digital display provides real-time readings and alerts, ensuring that operators can respond promptly to any gas leaks. Customizable alarm settings further enhance safety by allowing users to set specific thresholds for different gases based on their operational requirements.

Another notable characteristic is the GLDA690 and GLDA696's connectivity options. They support integration with existing safety systems, allowing for seamless communication with central control systems. This feature enables remote monitoring and reporting, providing operators with a comprehensive overview of the facility's safety status at any given moment.

The systems are designed with a focus on durability and resilience. Their housing is made from high-quality materials that protect against dust, moisture, and corrosive substances, ensuring that the devices can withstand the rigors of industrial environments. Maintenance is made straightforward, too, with modular components that facilitate easy repairs and replacements.

The GLDA690 and GLDA696 also emphasize low power consumption, making them energy-efficient choices for continuous operation. This characteristic not only reduces operational costs but also minimizes the environmental impact, aligning with modern sustainability goals.

In summary, the GE GLDA690 and GLDA696 gas detection systems embody cutting-edge technology, bringing together reliability, user-friendliness, and connectivity. Whether used in chemical plants, oil refineries, or pharmaceutical facilities, these systems provide critical protection against the dangers posed by hazardous gases, ensuring safer work environments for all.
Top Page Image Contents