GE GSD3930, GSD3920, GSD3830 Spots and filming, On glasses, Flatware, Cloudiness on, Glassware

InformationSafety	Before you call for service…
	Troubleshooting Tips
	Problem	Possible Causes	What To Do
	Spots and filming	Extremely hard water	• Use Jet-Dry® rinse agent to
Instructions	on glasses and	Low inlet water	remove spots and prevent
	flatware		new film build-up.
		temperature
			• To remove stubborn spots
		Overloading the
			and pre-existing film from
		dishwasher
			glassware:
		Improper loading
			1 Remove all metal utensils
Operating		Old or damp powder
			from the dishwasher.
		detergent	2 Do not add detergent.
		Rinse agent dispenser
			3 Select the longest cycle.
		empty
			4 Start the dishwasher and
		Too little detergent
			allow to run for 18 to 22
			minutes. Dishwasher will
			now be in the main wash.
Tips			5 Open the door and pour
			2 cups (500 ml) of white
Troubleshooting			vinegar into the bottom of
			the dishwasher.
			6 Close the door and allow
			to complete the cycle.
			If vinegar rinse doesn’t
			work: Repeat as above,
			except use 1/4 cup (60 ml)
			of citric acid crystals
			instead of vinegar.
	Cloudiness on	Combination of soft	• This is called etching and
	glassware	water and too much	is permanent. To prevent
		detergent	this from happening, use
Service			less detergent if you have
			will get them clean.
			soft water. Wash glassware
Customer			in the shortest cycle that
		Water temperature	• Lower the water heater
		entering the dishwasher	temperature.
		exceeds 150°F.
	22