Operating Instructions, Troubleshooting Tips

Safety Instructions

Operating Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or death.

WATER HEATER SAFETY

Under certain conditions hydrogen gas may be produced in a water heater that has not been used for

two weeks or more. HYDROGEN GAS IS EXPLOSIVE.

If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allow them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

Use this appliance only for its intended purpose as described in this Owner’s Manual.

PROPER INSTALLATION AND MAINTENANCE

This dishwasher must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet with your dishwasher, you can receive one by visiting our website at GEAppliances.com.

Troubleshooting Tips

■Connect to a grounded metal, permanent wiring system; or run an equipment-grounding conductor with the circuit conductors and connect to the equipment-grounding terminal or lead of the appliance.

■Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.

■Use supply conductors rated at least 75°C (167°F).

■Dispose of discarded appliances and shipping or packing material properly.

■Do not attempt to repair or replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

■To minimize the possibility of electric shock, disconnect this appliance from the power supply before attempting any maintenance. NOTE: Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

WARNING!

DO NOT…

Consumer Support

■Do not tamper with controls.

■Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

■Do not discard a dishwasher without first removing the door of the washing compartment.

■Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

■Do not allow children to play around dishwasher when opening or closing door due to the possibility of small fingers being pinched in door.

■Do not allow children to play with, on or around this appliance or any discarded appliance.

GSD1100, GSD1000, GSD1200, GSD1900, GSD2001 specifications

General Electric (GE) has long been a leader in the production of advanced gas detection systems. Among its notable models are the GSD2001, GSD1900, GSD1200, GSD1000, and GSD1100. Each model encompasses a range of features and technologies tailored to provide effective detection and management of gas leaks in various environments.

Starting with the GSD2001, this cutting-edge system is designed for the highest level of safety in industrial applications. It boasts a multi-gas detection capability, allowing it to monitor various gases simultaneously. This model uses advanced sensors that are highly sensitive, ensuring rapid response times to potential gas leaks. The GSD2001 also integrates with centralized monitoring systems, enabling real-time data analysis and automated alerts.

The GSD1900 is another robust model favored for its versatility and user-friendly interface. It is equipped with a high-resolution display that provides clear readings of gas concentrations. The system supports both wired and wireless connectivity options, allowing for flexible installation in diverse settings. Its modular design allows for easy upgrades and maintenance, making it a cost-effective solution for businesses.

Moving to the GSD1200, this model is renowned for its portability and ease of use. Designed for both indoor and outdoor applications, the GSD1200 offers battery-powered operation, enabling it to be deployed in remote areas without access to power sources. Its intuitive interface allows users to quickly calibrate and deploy the unit, providing essential gas safety measures in emergency situations.

The GSD1000 is a reliable choice for commercial environments, featuring a rugged design that withstands harsh conditions. It utilizes advanced detection technologies such as infrared sensors, enhancing accuracy and reducing false positives. Additionally, the GSD1000 integrates seamlessly with existing safety systems, enhancing overall operational safety.

Lastly, the GSD1100 stands out with its advanced analytics capabilities. It offers predictive maintenance features that use historical data to anticipate potential gas leak occurrences. This proactive approach not only enhances safety but also helps in efficient resource management. The GSD1100’s open architecture facilitates integration with other GE products, providing a comprehensive safety solution.

In summary, GE's range of gas detection systems, including the GSD2001, GSD1900, GSD1200, GSD1000, and GSD1100, showcases a commitment to advancing safety in various industrial applications through innovative technologies and user-friendly designs. These models cater to a wide array of operational needs, ensuring effective monitoring and management of gas hazards.