Sirius Satellite Radio 4 manual To view the program information stored in memory

A Replace–Cancelscreen will then be displayed which will allow you to choose whether to re- place an existing alert stored in memory, or to cancel storing the alert to memory. (Figure 18)

Replace

Cancel

Figure 18

Turn the Rotary Knob to select whether to replace an existing alert or cancel saving the alert to memory. If you choose to cancel saving the alert, the receiver will revert to the last active display mode. If you have chosen to replace an existing alert, a listing of all the alerts stored in memory will be displayed. (Figure 19)

Replace X/Y

Artist Name/Song Title

Artist Name

Sports Team

Artist Name/Song Title

Sports Team

Figure 19

Turn the Rotary Knob to highlight the alert that you would like to replace and press the Rotary Knob to store the new alert. If the new alert was successfully stored in memory, a Artist/Song/Game Stored pop-up screen followed by an X Used/Y Empty screen will be displayed for one and two seconds respectively. (Figure 17) X is the total number of listings stored in memory, and Y is the total number of memory listings still available for storage. The receiver will revert to the last active display mode.

Viewing Program Information stored in Memory

To view the program information stored in memory:

1.Press and hold the MEMO button for three seconds to enter the S-Seek mode. The program information stored in memory will be displayed in one-at-a-time page format.

[ Operation ] 31