Prepare Electrical Wiring

Installation Preparation

W ARNING

FOR PERSONAL SAFETY: Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance.

Electrical Requirements

This appliance must be supplied with 120V, 60Hz., and connected to an individual properly grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse.

Wiring must be 2 wire with ground.

If the electrical supply does not meet the above requirements, call a licensed electrician before proceeding.

Grounding Instructions —– Cable Direct

This appliance must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and be connected to the equipment grounding terminal or lead on the appliance.

Grounding Instructions —– Power Cord Models This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with local codes and ordinances.

W ARNING

The improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt that the appliance is properly grounded.

1-1/2" Dia.

Hole (Max.)

from

Cabinet

24"

from Wall

Ground

Figure 5	Black	White

Cabinet Preparation & Wire Routing

The wiring may enter the opening from either side, rear or the floor within the shaded area.

Cut a 1-1/2 ″Max.dia.hole to admit the electrical cable. The hole must be free of sharp edges. If the cabinet wall is metal, the hole edge must be covered with a bushing.

Cable direct connections may pass through the same hole as the drain hose and hot water line, if convenient. If cabinet wall is metal, the hole edge must be covered with a bushing. NOTE: Power cords with plug must pass through a separate hole.

Electrical Connection to Dishwasher

Electrical connection is on the right front of dishwasher . For cable direct connections the cable must be routed as shown in Figure 5. Cable must extend a minimum of

24"from the rear wall.

For power cord connections, install a 3-prong ground-ing type receptacle. The power -supply receptacle for the appliance shall be installed in a cabinet or on a wall adjacent to the undercounter space in which the appliance is to be installed.

206C1559P148 specifications

The GE 206C1559P148 is a sophisticated and advanced gas turbine engine that symbolizes General Electric's commitment to innovation and efficiency in aviation technology. This engine is specifically designed for use in turboprop and regional jet applications, showcasing a blend of power, reliability, and fuel efficiency that is essential in modern aviation.

One of the main features of the GE 206C1559P148 is its high thrust-to-weight ratio, which enables aircraft to achieve better performance, shorter takeoff distances, and enhanced climb rates. This is particularly beneficial in regional aviation where performance and efficiency are crucial. The engine is equipped with a modular design, allowing for easier maintenance and quicker turnaround times. This modular approach reduces downtime and operational costs for airlines, making it a cost-effective choice for operators.

In terms of technology, the GE 206C1559P148 utilizes advanced materials and manufacturing processes. The engine's materials are engineered to withstand high temperatures and pressures, ensuring operational longevity and reliability. Moreover, it incorporates state-of-the-art aerodynamics, which facilitates improved airflow and minimizes drag, leading to better fuel efficiency. This is particularly important in an era where reducing carbon emissions is a key focus in aviation.

The characteristics of the GE 206C1559P148 also include a sophisticated control system that takes advantage of digital technology. This engine features fly-by-wire capabilities, which means that the aircraft's pilot controls are interpreted by electronic systems rather than mechanical linkages. This enhances the precision and responsiveness of the engine's performance and improves overall flight safety.

Additionally, the GE 206C1559P148 engine offers a broad operational envelope, allowing it to perform reliably in a variety of environmental conditions. This versatility makes it suitable for various missions including short-haul flights and regional routes. The engine is designed for easy integration into different airframe configurations, providing further flexibility for aircraft manufacturers.

In summary, the GE 206C1559P148 stands out with its remarkable thrust-to-weight ratio, modular design for effective maintenance, advanced materials, and high-performance technologies. Its integration into modern aircraft not only enhances operational efficiency but also aligns with the industry's goal of sustainable aviation. As aviation continues to evolve, the GE 206C1559P148 will remain a pivotal component in shaping the future of regional air travel.

Installation Preparation