Undercounter Installation in inches | GE ZTD910BF/SF/WF specification

Monogram“ .

ZTD910BF/SF/WF – GE Monogram 30" Warming Drawer

Undercounter Installation (in inches)

Install

	2x4 or 2x2	Electrical Outlet 42" Max.
	Anti-Tip Block	Electrical Outlet	From Right Side	1-1/2 Cabinet Top
	Against Rear	Flush With Side		1-1/2 Cabinet Top
	Against Rear
	Cabinet Wall		25
	Cabinet Wall	of Cabinet 7" Max.
	9" From Floor	of Cabinet 7" Max.
Electrical	to Bottom	7	Install a Solid Barrier
Electrical	of Block	7	Below a Cooktop
Outlet 16" Max.	of Block		Below a Cooktop
Outlet 16" Max.			See Note
From Left Side			See Note
From Left Side
			1 Min.*	36
	9			Countertop
	9			Height
			9-1/4	Height
			9-1/4
			28-1/2

Note: When installing warming drawer with a cooktop, allow a 2" minimum from cooktop burner box bottom to top of cut-out.

Important Installation Note:

Must provide anti-tip brace at the back of the cabinet and at the top of the cutout.

Optional Accessories:

ZXD30B – 3/4" wood panel trim kit

23-1/2 Min.

Solid Barrier		w
		w
1/4		Belo
1/4		er
Air Gap	Installation	er
Air Gap	aw
	aw
	Dr

Install a Solid Barrier

and a 1/4" Air Gap

Above Warming Drawer

*Note: When installing the warming drawer below a cooktop, a solid barrier must be installed at 1" from the lowest point of the bottom of cooktop burner box to the top of cutout. Use any solid material such as 1/4" thick plywood. Allow at least 1/4" air gap between the barrier and the top of the warming drawer. See label on top of the warming drawer for approved cooktop models.

•When installed, the front face of the drawer will be nearly flush with adjacent cabinetry doors.

•Drawer overlaps will conceal cut edges on all sides of the opening. The rough opening for the drawer must be:

–Depth 23-1/2" min. from inside back to front of cabinet frame. –Width 25-1/2" for 27" wide models, 28-1/2" for 30" wide models. –Height 9-1/4"

•5" min. above floor or 1" above toekick. 23-1/4" from floor to bottom of cutout is recommended for under countertop installation.

Installation below a cooktop:

Warming drawers are approved for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer for approved models. A solid barrier and air gap between cooktop and warming drawer is required. See Note above.

Installation below a cabinet drawer:

The warming drawer may be installed beneath a cabinet drawer. In this installation, a solid barrier should be installed above the warming drawer to block access. Use any solid material such as 1/4" thick plywood. Allow at least 1/4" air gap between the barrier and the top of the warming drawer. Observe the 5" min. above the floor or 1" above the toekick minimum installation height.

Note: If you are installing in frameless cabinets, it may be necessary to install 1/2" wide cleats to accept drawer mounting screws. See drawer to find exact locations of mounting screws.

Specification Revised 10/05

130716

Side to Side Installation:

Install two warming drawers in separate cutouts. Allow 2" min. between cutouts.

Min.

Side to Side Installation

Listed by

Underwriters

RLaboratories

For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

ZTD910BF/SF/WF specifications

The GE ZTD910BF/SF/WF is a revolutionary appliance that epitomizes efficiency and modern design in the realm of laundry machines. This line features a front-loading washer-dryer combo that caters to the demands of both residential and commercial users, offering a plethora of innovative technologies and functionalities aimed at simplifying the laundry process.

One of the standout features of the GE ZTD910 series is its advanced washing technology. The appliance incorporates an energy-efficient washing system that reduces water consumption while still delivering exceptional cleaning results. With varying load capacities, users can easily adjust settings to accommodate different laundry volumes, making it ideal for families, apartments, or small businesses.

The washer also boasts a unique steam cleaning option, which helps penetrate and eliminate tough stains, allergens, and bacteria from fabrics. This feature is particularly beneficial for households with children or those with sensitive skin. Coupled with multiple wash cycles and customizable settings, the GE ZTD910 offers a tailored laundry experience that meets diverse fabric care needs.

Another hallmark of the ZTD910 series is the integrated dryer functionality. The washer-dryer combo uses a ventless drying system, allowing users to install the appliance in spaces previously unsuitable for traditional dryers. This system dries clothes efficiently without the need for external venting, making it a perfect choice for urban living situations.

The user-friendly interface features a digital display that simplifies programming and allows users to monitor cycles easily. With options for timed drying, sensor drying, and a quick wash feature, the GE ZTD910 flexibly adapts to the demands of a busy lifestyle.

In terms of energy efficiency, this model is designed to meet and exceed Energy Star standards, promoting environmentally friendly practices while reducing utility bills. Its eco-friendly certifications further add to its appeal for conscious consumers.

Finally, the sleek design of the GE ZTD910—with a stainless steel tub and polished exterior—ensures that it not only functions well but also complements modern home aesthetics. Robust construction guarantees durability, making it a worthy investment for years to come.

In summary, the GE ZTD910BF/SF/WF combines cutting-edge technology, user convenience, and energy efficiency, making it a premier choice for those seeking an all-in-one laundry solution. Whether for family use or business needs, this machine stands out as a model of innovation and practicality.