GE ZTD910 owner manual Rack, Stainless steel

Page 12

Rack

Care and Cleaning

Electric Warming Drawer

Clean the rack with detergent and water. After cleaning, rinse the rack with clean water and dry with a clean cloth.

Stainless steel

Do not use a steel wool pad; it will scratch the surface.

Clean with hot soapy water. Rinse and dry.

If food soil remains, try a general kitchen cleaner, such as Fantastik®, Simple Green® or Formula 409®.

For hard to clean soil use a standard stainless steel cleaner such as Bon-Ami®or Cameo®. Soils can also be soaked several hours with wet towels. Apply cleaner with a damp sponge, rinse thoroughly and dry. Always scrub lightly in the direction of the grain.

After cleaning, use a stainless steel polish such as Stainless Steel Magic®.

Control knob

The control knob may be removed for easier cleaning.

Before removing the knob for cleaning, please note that it is in the PROOF position.

Wash the knob in soap and water or a vinegar and hot water solution but do not soak.

Dry and replace the knob.

12

Image 12
Contents Electric Warming Drawer Contents Before using your warming drawerIntroduction Write down the model & serial numbersIf you need service If you received a damaged warming drawer Save time & moneySafety Precautions Read and follow this Safety Information carefully Not all features are on all models. Appearance may vary Design informationOn signal light Moisture selector Control knobAdditional pans Five commercial pans with lids 4″ deepWhen using the warming drawer… RackTo warm serving bowl and plates Do not line the warming drawer with aluminum foilTo proof yeast bread dough TipsTemperature selection chart for moist foods Care and Cleaning Warming drawer panStainless steel Before You Call For Service… TroubleshootingFor service Save timeGE Answer Center GE Answer Center Consumer information service From the Date Original PurchaseRead your Use and Care material 888.880.3030
Related manuals
Manual 16 pages 29.35 Kb