Options and Accessories
Self Draining Grease System: Drain grease and rain water back through the ductwork into the specially designed Greenheck hood. The hood then channels grease and rain water into the restaurant’s floor grease trap.
Coatings: Wide variety of coatings and colors are available for decorative to acidic applications.
Vented Curb Extension: Mounts between roof curb and roof mounted fans to meet NFPA requirements of 40 in. minimum discharge above the roof when mounted on a minimum 8 in. high roof curb.
Severe Duty Curb: Model SD is specifically designed for the optional hurricane use. It is attached directly to the building structure with
PERMATECTOR®
POLYESTER
POLYESTER
BAKED
ENAMEL
Permatector™ is our standard coating. Typically used for applications that require corrosion resistance in indoor and outdoor environments.
Baked Enamel Decorative Coatings
are heat cured enamels applied either as wet paints or electrostatic powders. Customers can choose from 16 standard decorative colors or color match any color.
extremely high structural design load requirements. Maximum design load is 130 psf.
Drain Connection: Allows for single point drainage of grease, water or other residues.
Grease Trap: Aluminum trap designed to collect grease residue to avoid drainage onto roof surface.
Grease Trap with Absorbent Material: Same as above with an absorbent material to collect grease residue and repel water for easy
Windband Extension: Tube that raises fans discharge an additional 36 in. for special code requirements.
Curb Seal: Rubber seal between fan and curb to assure proper sealing when attached to a curb.
Roof Curbs: Wide variety of roof curbs are available for mounting the fan to the roof, including: vented, flanged, pitched.
periodic disposal.
Tie Down Points: Four brackets located on the windband for securing the fan in heavy wind applications.
Velocity Accelerator: Increases fan outlet/ discharge velocity. Up to 3,000 feet per minute.