Sirius Satellite Radio manual ST2 Starmate Replay User and Installation Guide

If you are using the velcro strip for mounting, attach the velcro strip to the back of the mounting plate.

Route the cables through the mounting plate underneath the tabs as shown. The cables may be routed across the mounting plate, or routed down to exit at the bottom.

Place the Receiver into the mounting plate by first placing the bottom of the Receiver into the tabs at the bottom of the mounting plate (1), and then pivoting the top of the receiver into the mounting plate until it snaps into place (2).

1

2

If you are using the suction cup mount, attach the suction cup mount to the vehicle windshield, or other surface, as follows:

1.Clean the area where you are attaching the suction cup with an alcohol wipe.

2.Lift up the cam lever on the suction cup mount as shown.

8

ST2 Starmate Replay User and Installation Guide