Fisher & Paykel RF540A, RF610A, RF201A installation instructions Installation instructions

Page 8

6Installation instructions

Installation instructions:

1Ensure that refrigerator is not plugged into a power supply.

2 Locate isolation tap for water connection – cold water feed only (dishwasher or sink mixer taps) – if you can’t find the connection tap, contact an authorised plumber in your state or town to fit your water connection.

3 Connect the 200 mm (8”) blue tubing to the outlet of the PRV (blue collet) and the inlet connection of the water filter cartridge as shown in Diagram 1. Gently pull on both ends to ensure it is locked.

4 Connect the white 6 mm (¼”) tubing to the outlet of the water filter cartridge as shown in Diagram 2. Gently pull to ensure it is locked.

5 Measure the required length of tubing to run from the PRV to the water connection point.

6 Cut the tubing making sure the ends are square and clean. 7 Connect the tubing to the tap connection and the base

of the PRV (white collet) and then to the tap as shown in Diagram 3. Please note that the tap connection supplied should fit most installation situations. If your tap requires a different fitting, please contact an authorised plumber

in your state or town to purchase the correct fitting.

8 Connect one locking key to each side of the water filter cartridge in between the cartridge and the locking collet as shown in Diagram 4.

9 To flush the water filter and check for leaks, aim the end of the tubing into a bucket, turn isolating tap on and run at least 3 litres (3 qt) of water through. Once complete, turn isolating tap off.

10 Locate desired position for water filter noting carefully the following points:

It is recommended to fit the filter in a vertical orientation with the water filter head at the top. This will minimise water leakage when replacing cartridge. Ensure the filter is in a convenient location to access every 6 months for replacement. We suggest that

this location is beside the water filter supply tap in the cupboard beside the refrigerator.

A minimum clearance of 64 mm (2 ½”) from the bottom of the filter cartridge is required to perform cartridge removal.

Do not screw filter to fridge.

Diagram 1

Fig.3 PRV connection

Diagram 2

Fig.4 Waterline connection

Diagram 3

Fig.5 Tap connection

Diagram 4

Fig.6 Locking key

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation instructions and user guide Page Contents Introduction We hope you enjoy your new refrigeratorElectrical Safety and warningsDisposal Storing food and drinks Power failure food safetyCleaning Installation instructions Contents of filter kitInstallation instructions Ensure that refrigerator is not plugged into a power supplyWaterline connection to refrigerator Connection to water supply Power LocationE402B, E442B, E522B RF610A/RF540A/RF201A Ventilation and installation Levelling of refrigerator door RF610A, RF540A, RF201A only InstallationRF610A, RF540A, RF201A only What to do if your product is unstable Unstable refrigeratorEnergy efficiency Moving or storing your refrigeratorMoving your refrigerator Storing your refrigerator or freezerBefore you start using your Ice & Water refrigerator All about the display KeysMeasured Fill see Main menuDisplay features Measured Fill see Temperature seeSettings/User alerts see Dispensing water seeUsing your water dispenser Dispensing padFirst use DispensingUsing your ice maker Ice makerInformation about your ice maker Ice storage bin and scoop in correct positionChanging the Measured Fill units Using the display optionsMeasured Fill Recommended times Freezer ChillBottle Chill Temperature of your refrigerator and freezer Bottle Chill contdSettings Water unit conversionOnce in Sabbath Mode Filter resetFault User warningsActive Smart special features Fruit and vegetable bins and humidity slide where fittedFruit and vegetable bins and humidity control cover Suitable for Salad Greens Mixed fruitBottle rack where fitted Slim storage drawer where fittedDoor alarms Water filter Changing the water filter cartridgeTo reset the filter indicator To disable the filter indicatorCalibration quick reference guides Measured Fill CalibrationMeasured Fill Calibration Active Smart maintenance Replacement of the interior light Halogen light bulbCleaning and caring for your refrigerator Water dispenser pad and interfaceOther exterior surfaces Water evaporator trayInterior Glass shelvesBottle rack Automatic ice dispenserHumidity Control System cleaning Humidity Control SystemTo remove trays or fixed bins On vacation/holidayNormal operational sounds include Refrigerator soundsNormal refrigerator sounds Red meat PoultryFish and seafood Precooked foods and leftoversRecommended freezer storage times Storing food in your freezerFrozen food care Meat, poultry and game FishVegetables Prepared and cooked foodsTroubleshooting Sides of cabinet This is normal Are warm Ice buildupInside freezer CompartmentAutomatic ice Maker does not WorkIce cubes have Odour/tasteWater has poor Taste/odourWater dispenser Does not workManufacturers warranty This warranty does not coverFisher & Paykel undertakes to Please keep this User Guide in a safe placeBefore you call for service or assistance Customer careNew Zealand if you need assistance Australia if you need assistanceIreland if you need assistance For the rest of the world…Product details Dealer SuburbPage Page Page Copyright Fisher & Paykel 2007. All rights reserved
Related manuals
Manual 60 pages 21.58 Kb Manual 60 pages 50.43 Kb Manual 46 pages 2.6 Kb Manual 104 pages 26.02 Kb

RF540A, RF201A, RF610A specifications

Fisher & Paykel is renowned for its innovative approach to kitchen appliances, particularly in refrigeration technology. The RF170W, RF170A, RF201A, E522B, and RF135B models embody the brand's commitment to efficiency, design, and usability.

The RF170W and RF170A are part of Fisher & Paykel's 70cm series. Both models feature a capacious 491-liter total capacity, making them ideal for family use. Their ActiveSmartTM technology ensures that the refrigerator maintains optimal temperature due to smart sensors that adapt to everyday usage patterns. It preserves the freshness of food longer by minimizing temperature fluctuations.

The RF201A model is characterized by its generous 646-liter capacity, catering to larger households. Similar to the RF170 series, it also incorporates ActiveSmartTM technology and offers versatile shelving options, ensuring that users can efficiently organize their groceries. The external ice and water dispenser stands out, providing convenience at your fingertips while maintaining a sleek exterior.

Transitioning to the E522B model, this unit is notable for its distinct design that embodies Fisher & Paykel's integrated approach. This refrigerator offers a significantly larger capacity of 525 liters, making it suitable for extensive storage needs. It features separate cooling systems for the fridge and freezer, which prevents odors from mingling and ensures an optimal environment for various food types.

The RF135B model is designed with smaller kitchens in mind, boasting a compact 373-liter capacity. Despite its size, it does not compromise on features. It still utilizes the ActiveSmart™ technology and a flexible shelving arrangement that maximizes storage, making it an excellent choice for those in urban living situations or smaller homes.

All these models reflect Fisher & Paykel's commitment to high-quality design and functionality. Their intuitive controls, smart technologies, and efficient energy use make them not only visually appealing but also rational choices for modern kitchens. With an emphasis on user-friendly features and sustainable practices, these refrigerators stand as premier options in the market, offering remarkable performance and reliability.
Top Page Image Contents