FIGURE 16 | FIGURE 17 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7.CLOCK: Press the Enter button and use the CH+/- buttons to highlight an option and press the Enter button for that option.
•For “Time Zone”, use the CH+/- buttons to highlight your time zone and press the Enter button to set. (Figure 16)
•For “DST”, use the CH+/- buttons to select “Yes” or “No” Daylight Savings Time for your area. (Figure 17)
•For “Digital Clock” or “Analog Clock”, select one or the other depending upon how you prefer the time be represented on the display. The month/day/year will also be displayed when the clock is set in “Digital Mode” only. The clock will be displayed when the Model Satellite is set to FM, AM, AUX, Sleep Mode (see below), or when Off.
NOTE: The clock and month/day/year data are provided by the Sirius satellites and will automatically set and update based upon the received signal with the Model Satellite On. When the Model Satellite is Off but plugged in, the clock and date data will be maintained by the internal software.
FIGURE 18 |
|
|
|
| FIGURE 19 |
|
|
|
| FIGURE 19 |
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8.ALARM SETTINGS: Press the Enter button and the hour will be flashing. (Figure 18) Use the CH+/- buttons to adjust the hour. Holding the CH+/- buttons will cycle through the numbers quickly. Changing the hour will not affect the minutes. Once the hour is correct, use the CAT> button to move to the minutes. (Figure 19) Again, use the CH+/- buttons to adjust the minutes. Changing the minutes will not affect the hour. Once the minutes are correct, press the CAT> button to move to PM or AM and use the CH+/- buttons to designate AM or PM. Once AM or PM is correct, use the CAT> button to move to the alarm bell icon and use the CH+/- button to set the alarm or deactivate the alarm (a line will be shown through the bell icon). (Figure 20) Now press the Enter button. If the alarm has been set, the alarm bell icon will be shown when the clock is displayed.
Before turning the Model Satellite Off, set the unit to the Sirius channel or FM or AM station you wish to wake to and adjust the volume. In the event the Sirius
15