Fisher & Paykel HC90PCHTX2 Cleaning and maintenance, General maintenance, Aluminium filters

Page 11

Cleaning and maintenance 9

Caution!

Never use abrasive or oil based liquid cleaners.

General maintenance

The manufacturer is not liable for any damage caused by not following these instructions.

The wall canopy should be cleaned regularly using warm water with soap or mild liquid detergents. This ensures that no build-up of grease occurs as these deposits are corrosive. Do not use abrasives or harsh detergents/cleaning fluids.

Note: in areas of high humidity and coastal environments, cleaning should be carried out frequently.

Grease deposit container

Your wall canopy is fitted with a clear container located underneath the motor housing, that is only visible when the grease filters are removed.

Over time, oil, fat and grease, that is normally deposited inside the motor casing, is directed into this container for easy cleaning.

This unique design will help ensure your wall canopy remains in peak condition by minimising the amount of fat or grease collected in the motor.

Note:

This container should be cleaned as necessary, usually on an annual basis. Always ensure the container is in place prior to using the wall canopy.

Do not attempt to block the hole in the motor casing.

Aluminium filters

The grease filters must be periodically cleaned (at least every two months).

Remove the grease filters and wash them either by hand using hot soapy water or place them in the dishwasher using mild detergent. Badly smoked filters may be cleaned with “cookware cleaners”.

Note: some discolouration of the frame may occur.

Charcoal filters

Charcoal filters are designed to remove grease and odours from cooking vapours, prior to the cleansed air re-entering the kitchen (when the wall canopy is in recirculating mode). Charcoal filters are disposable items and it is recommended that these should be replaced every three to six months depending on use.

Note:

Fully saturated charcoal filters can become a barrier to air movement, impeding the wall canopy’s performance.

In the event of fire, fully grease laden filters could be flammable and therefore regular replacement is recommended.

In ducted installations, conventional aluminium filters are recommended.

For replacement charcoal filters, ducting accessories, spare parts and service, please contact your local supplier or Fisher & Paykel Customer Care Centre.

Image 11
Contents Installation instructions Page Contents Electrical Shock Hazard Safety and warningsTypical equipment required Contents of packagingAccessories Recirculation Installation instructionsHeight of wall canopy Ducting optionsPreparing the wall canopy for installation Establishing height of rangehood Determining location of the two fixing keyholes Installation is now completeControl panel Getting started quicklyAluminium filters Cleaning and maintenanceGeneral maintenance Grease deposit containerLight bulb replacement Halogen bulb 12 Volts/20 Watt Please keep this User Guide in a safe place This Warranty does not coverFisher & Paykel undertakes to For Australian CustomersAustralia if you need assistance Before you call for service or assistance…Customer care New Zealand if you need assistancePage NZ AU

HC90PCHTX2, HC60PCHTX2 specifications

Fisher & Paykel, a renowned name in innovative kitchen solutions, offers two exceptional range hoods: the HC60PCHTX2 and the HC90PCHTX2. Both models are designed to enhance your cooking experience while providing outstanding performance and aesthetic appeal.

The HC60PCHTX2 is a 60 cm wall-mounted range hood that combines modern design with advanced technology. It features a sleek, stainless-steel finish that complements any kitchen décor. With a powerful 600 m3/h extraction rate, this unit efficiently removes cooking odors, smoke, and steam from your kitchen, ensuring a fresh environment while you prepare meals. Its intuitive controls allow for easy adjustment of the three fan speeds, accommodating various cooking styles and requirements.

On the other hand, the HC90PCHTX2 boasts a larger 90 cm width, making it ideal for bigger kitchens and cooking surfaces. This model also features a robust 600 m3/h extraction rate, similar to the HC60PCHTX2, but offers a broader coverage area. Both range hoods are equipped with LED lighting that illuminates your cooking area, enhancing visibility and adding an elegant touch to your kitchen ambiance.

One of the standout features of these range hoods is their advanced air filtration system, which utilizes a stainless-steel mesh filter designed to capture grease and particles efficiently. This washable filter not only helps keep the ventilation system clean but also assures longevity and reduced maintenance costs. Both models are compatible with optional charcoal filters, providing additional odor control for kitchens where ducting is not feasible.

Noise levels are kept to a minimum with Fisher & Paykel’s WhisperQuiet technology, ensuring a peaceful cooking environment. These range hoods are designed to operate smoothly, making them perfect for those who enjoy cooking and spending time in the kitchen.

Installation flexibility is another appealing aspect of the HC60PCHTX2 and HC90PCHTX2. Both models can be easily integrated into various kitchen designs, whether you prefer a traditional or modern aesthetic. Their thoughtful engineering ensures that they not only perform well but also become a stylish focal point in your kitchen.

In summary, the Fisher & Paykel HC60PCHTX2 and HC90PCHTX2 range hoods are exemplary choices for anyone looking to combine efficiency, style, and advanced technology in their kitchen. With their powerful extraction capabilities, superior air filtration, and elegant designs, these models meet the demands of contemporary cooking while enhancing the overall kitchen experience.