Fisher & Paykel CG603, CG903 manual Troubleshooting chart

Page 12

10

Troubleshooting

Troubleshooting chart

Problem

Possible solutions

My cooktop does not light

Check the cooktop is plugged in and the electricity is switched on.

 

Check the gas supply valve is turned on and the supply to the

 

house is working. You should hear the gas when you turn a burner

 

on.

 

The electrodes may be dirty. Clean them with a toothbrush and

 

methylated spirits.

 

The burner parts may not be located properly. Check the assembly

 

and make sure the burner cap is sitting flat.

 

 

My burner flames are

The burner parts may not be located properly. Check the assembly

yellow or hard to start

and make sure the burner cap is sitting flat.

 

If you use bottled gas this may indicate you are getting near the

 

end of the bottle.

 

Check the burner parts are clean and dry.

 

The gas pressure may not be at the correct level. Check with your

 

service person or installer.

 

Your cooktop may not be set up for the gas you are using. Check

 

this with your service person or installer.

 

 

One of my burners has an

Check the burner parts are clean and dry. Check the assembly and

uneven flame

make sure the burner cap is sitting flat.

 

 

My cooktop goes out when

Some cooktops have a safety feature called ‘flame failure’. Hold

I let go of the knob

down the knob for approximately five seconds after the burner has

 

lit. Releasing the knob too soon will extinguish the flame. See the

 

‘Flame failure safety feature’ in ‘Using your cooktop’.

The flame goes out at low settings

The gas supply pressure may be low. Check this with your service person or installer.

The low setting may have been adjusted incorrectly. Check this with your service person or installer.

My burners do not turn down much (when running on bottled gas or LPG)

Your cooktop may not have been adjusted correctly. Check this with your service person or installer.

The flame tips are very yellow

Call your service person to service the cooktop.

There are objectionable

Call your service person to service the cooktop.

odours

 

 

The flame appears to lift off Call your service person to service the cooktop.

the burner

 

 

 

There is an electricity

If there is an electricity failure, you can still use your cooktop.

failure

Light the burners by holding a match close to the side of the

 

burner and turning the control knob to the High position. Wait

 

until the flame is burning evenly before adjusting.

 

 

Image 12
Contents User guide Page Contents Before using your new cooktop IntroductionAbout your new cooktop Safety and warnings Important safety precautionsUsing your cooktop Lighting the cooktopIf the cooktop does not light Flame failure safety feature some models only If the flame is irregularElectricity failure Using a wok General guidelinesUsing a SimmerMat if supplied Using a griddle if suppliedCare and cleaning General cleaning adviceCleaning chart CleaningTroubleshooting Troubleshooting chartWarranty and service Before you call for service or assistanceProduct details Page Page Page Page Page Page NZ AU

CG903, CG603, CG903 specifications

Fisher & Paykel is renowned for its commitment to quality and innovation in kitchen appliances, and the CG603 and CG903 gas cooktops exemplify this philosophy. These models stand out in both design and functionality, catering to home chefs who require precision and performance.

The CG603 is a 60 cm gas cooktop designed for smaller kitchens or apartment living. It features four burners, including a high-power burner that allows for rapid boiling and searing. The flame failure device is an essential safety feature that ensures gas flow is cut off if the flame goes out, providing peace of mind during meal preparation. The durable stainless steel surface is not only easy to clean but also adds a modern touch to any kitchen. Its minimalist design blends seamlessly with various kitchen decors.

The CG903, a larger 90 cm model, takes cooking versatility to the next level. With five burners, including a powerful wok burner, this cooktop is perfect for those who enjoy cooking diverse recipes. The dual flame burner system provides precise temperature control, allowing chefs to simmer delicate sauces or achieve high temperatures for stir-frying. The easy-to-use dial controls are positioned at the front for accessibility and safety, ensuring that they remain clear of hot surfaces.

Both models incorporate Fisher & Paykel's innovative technology, such as the high-efficiency burners that maximize gas usage while minimizing energy waste. The advanced ignition system guarantees quick and reliable start-ups, eliminating the frustration of struggling to light the burners. Additionally, the cooktops are equipped with easy-to-remove trivets and burner caps, making maintenance straightforward.

Another significant characteristic of the CG603 and CG903 is their compatibility with Fisher & Paykel's range of ovens and range hoods, creating a cohesive and efficient cooking space. The cooktops can be integrated into various kitchen designs, providing flexibility for homeowners and designers alike.

In summary, Fisher & Paykel's CG603 and CG903 gas cooktops combine style, functionality, and safety features. With their professional-grade performance, innovative technologies, and sleek design, they are an excellent choice for anyone seeking to enhance their culinary experience at home. Whether you're a casual cook or a seasoned chef, these cooktops will elevate your kitchen performance while complementing your interior design.