Fisher & Paykel OB60SL9DEX quick start Setting the Clock, Your Oven, First USE, Control Panel

QUICK START GUIDE

Built-in oven

NZ AU GB IE

SETTING THE CLOCK

You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.

Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel button to exit the clock setting. If you want to set the clock later, follow the steps under ‘To change the time’.

Keep this document handy for easy reference.

For detailed information on the other features of your oven, see your ‘User guide’.

Before using your oven, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.

For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service & warranty’ booklet.

When the oven is first switched on at the wall

To change the time

(within the user preference menu)

YOUR OVEN

OB60SL9DEX

1	Control panel	1	9
2	Oven vent louvres
3	Step down oven wire shelf		10
4	Oven light	2
5	Telescopic sliding shelf		11
6	Side rack
7	Oven wire shelf	3	12
8	Oven door and handle
		4
9	Oven seal
		5
	Accessories:	6	13
		7
10	Grill rack
11	Smokeless grill tray		14
12	Deep Roasting dish
13	Flat baking tray
14	Catalytic panels

1 The display will flash 24 Hr.	2a	Press the right scroll button to scroll
		between 24 Hrand 12 Hr
	2b	Press the select	button to confirm.

3 Press the left and right scroll	4 Press the select		button to confirm.
buttons to set the time.		The time set will now be steadily lit.

1Press and hold the left and right scroll

buttons together for 3 seconds

to enter the user preference menu.

The display will either show 12 Hror 24 Hr

2Press the select button to confirm. The display will flash.

3Follow steps 2-5 left to set the time.

At step 2a, you also now have the ability to scroll between 24 Hr,

12 Hr and OFF (turns the display off). Refer to the User guide to learn more about this feature.

8

FIRST USE	1 REMOVE ALL CABLE TIES & PACKAGING HOLDING
Important!	THE SHELVING IN PLACE

Before using your oven for the first time, you should fit both the Catalytic Panels (supplied). See ‘Care and cleaning’ in your user guide for details about these self cleaning panels.

THE CONTROL PANEL

You do this by:

Function indicators		Function dial		Temperature			Temperature		removing ALL the cable ties holding the shelving in place,
					Temperature				if the installer has not already done so.
(see ‘Oven functions’)				indicator			dial
	Function halo								removing the shelves and side racks
					halo
									fitting the catalytic panels
			FUNCTION			TEMPERATURE
									replacing the side racks and shelves
								We recommend you then condition the oven.
								Follow the steps below to fit the Catalytic Panels.

2 REMOVE ALL SHELVES FROM THE OVEN

3 REMOVE BOTH SIDE RACKS

	Rotisserie indicator
	(see ‘Using the
	Rotisserie’) in the
	User guide
Control lock indicator (see	if lit:
‘Locking the control panel’)	Rotisserie is
if lit:	in use
Control panel is locked

Locking the control panel To lock, press and hold the select

button for 2 seconds. To unlock, press and hold the

cancel button for 2 seconds.

Timer indicator (see ‘Using the timer’)

if lit:		Cooking time indicator (see ‘Automatic cooking’) in User guide
Timer is counting		if lit:
down	Display	Automatic cooking time is set

Stop time indicator

(see ‘Automatic cooking’) in User guide

1Remove all the shelving, taking special care with the telescopic sliding shelves.

2To remove a telescopic sliding shelf, grip it at the front (making sure you are gripping the wire shelf and the sliding frame together), lift upwards and pull it out of the oven.

For your safety, the wire shelf and telescopic sliding frame are built together as one unit and are not separable.

Remove both side racks by 1) pushing down on the retaining wire until it clears the lower lock stud and swing out wards to 2) clear the upper lock studs, then 3) lift out.

lock stud

retaining wire

2 2

1

Scroll Select Cancel if lit:

Automatic stop time is set

3

continued over