INSTALLATION INFORMATION FOR QUANTUM BI601/451 SERIES
IMPORTANT INFORMATION
Read the instructions before installing or using this product.
Please make this information available to the person responsible for installing this oven as soon as possible, it could reduce your installation cost.
CAUTION
In order to avoid a hazard these products must be installed according to these instructions for installation.
Please follow installation information carefully. If in doubt consult your local building authority
Failure to install the appliance correctly could invalidate any warranty or liability claims and lead to prosecution.
The product is to be installed only by an authorised person.
WARNINGS
The cavity must be a completely sealed box with no gaps. This will ensure the cooling air flows under the product to give the correct venting and cooling for the oven and cabinet surround.
Take care of sharp edges when handling products.
BEFORE YOU START
DO Ensure a suitable disconnection switch is incorporated in the permanent wiring, positioned to comply with the Local Wiring Rules and Regulations.
DO Ensure that the location of the oven connection socket is outside the installation space if the appliance is flush to the rear wall.
DO Ensure the benchtop and the oven cavity are square and level.
DO Ensure the electrician allows at least 1.5m free length of connection cable within the cavity for ease of installation and service of the oven.
DO Ensure that the interconnection cord between the cooktop and the oven or control box is not accessible via cupboard doors after installation. This applies to any extension cord as well, even though they are double insulated.
DO Use easy to clean finishes for the wall surfaces surrounding the oven and cooktop to aid removal of any cooking fume staining resulting from the use of the oven and cooktop.
DO Check the height from the floor suits the user.
DO Ensure that drawers and doors will be clear of obstruction when fully opened.
Part No. 541001 QBI601/451 NZ ERC E September 2001