Fisher & Paykel DD601V2, DD601IV2, DS601V2, DS601IV2 manual Pcb

F3

This fault is monitored

every 6 seconds while the mains power is connected. It is not monitored during diagnostics.

No

Is the element

on all the time?

Water sensed at greater than 80°C

Is the incoming water greater than 80° C?

Adjust the

Yes incoming water temperature

Yes

Replace the

electronic controller

No

Turn the power off at the supply and then retest

Check the wiring &		Is the element
connections to the
	No	heating all the
element and sensor		time?
PCB

Yes

	Not OK			OK
					Check the
Repair or replace
				resistance of the
the wiring or
				sensor at the PCB.
connections
					See chart.
					Not	OK
		Replace the
			heater plate

Replace the

electronic controller

- 24 -