Fisher & Paykel DD605 installation instructions Final checklist, Check all parts are installed

Page 26
Spray arm

24

Final checklist

Check all parts are installed.

Ensure product is level, securely fastened to the cabinetry and opens and closes freely. The DishDrawer® must be free to fully close with no resistance from the cabinetry.

Ensure inlet hose to water supply has rubber washer fitted and is tightened a further half turn after seal contact.

Ensure any knockouts or plugs in drain connection have been drilled out and drain connection has been made.

The drain hose connector must not support the weight of excess hoses. Keep hoses as fully extended as possible to prevent sagging. Any excess length of hose should be kept on the dishwasher side of the high loop.

If using Plumbing and Drainage OPTION 2, ensure the Highloop is a minimum 150 mm higher than the drain hose connector.

Turn on the power and water supply. Then press the power button to turn the DishDrawer® on. The DishDrawer® should beep and cycle select lights light up.

Check the sprayarm(s) are in place and free to rotate. Add three cups of water into the DishDrawer®.

On the Wash Programme Selector Panel press Rinse and close the drawer(s). Start the programme by pressing

the Start/Pause button.

After the Rinse programme has finished, ensure machine has run and drained correctly. Check water supply and drainage connection for leakage.

Repeat for each Drawer.

Troubleshooting

Excessive water remaining above the filter plate, after the rinse cycle

Check for kinked drain hoses or blocked waste connection, high loop not properly installed or drain hoses not routed correctly.

No water supply (shows on display)

Check water is connected, turned on and the spray arm(s) is correctly fitted and free to rotate.

DishDrawer® does not light up when the tub is opened

Ensure power is connected and is switched on. Check if Auto Power option is on.

Water around water supply and drainage connections

Check connections, existing plumbing and hoses for leaks. Check washer and hose clamps are correctly fitted.

If product is tipping

Ensure the product is secured to the cabinetry. Refer to page 7 or 18.

If front panels are misaligned

Check and relevel product. Check the cabinetry is square.

Drawer(s) don’t close properly

Ensure nothing is obstructing the drawer(s) from closing properly ie sound insulation, hoses or tub latches.

If a problem occurs, consult the Troubleshooting section of the User Guide.

If after checking these points you still need assistance, please refer to the Service & Warranty book for warranty details and your nearest Authorized Service Centre, or contact us through our website, www.fisherpaykel.com.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Installation instructions Safety and warnings Electrical hazardContents Product dimensions Double ModelsCabinetry dimensions Cabinetry dimensions mmCavity preparation Parts suppliedRoute the hoses and move into the cavity Removing the tub and levelling the product 30 mmSecuring the product and refitting the tub Plumbing and drainage Option DishDrawer and Standpipe Ø38 mmPlumbing and drainage Option 1 connection DishDrawer using sink trap with drain hose joiner Plumbing and drainage Option 2 connection Fitting the toekick Page Single Models Minimum clearances mm 13 mm 90o Single Models Removing the tub and securing the product Refitting the tub Left hand Right hand Plumbing and drainage Option 1 connection DishDrawer using sink trap with drain hose joiner Plumbing and drainage Option 2 connection Final checklist Check all parts are installedPage Part No a
Related manuals
Manual 39 pages 21.6 Kb

DD605 specifications

The Fisher & Paykel DD605 is a premium built-in dishwasher that combines sophisticated design with advanced technology, making it a favorite among homeowners who value both functionality and aesthetics. Known for its versatility and innovative engineering, the DD605 features a sleek, integrated design that allows it to blend seamlessly with kitchen cabinetry, providing a streamlined look.

One of the standout characteristics of the DD605 is its unique drawer design. This model features two independent drawers, allowing users to run smaller loads more efficiently without the need to fill a traditional dishwasher. This flexibility caters to various washing needs, whether you are hosting a large dinner party or simply cleaning up after a quick meal. Each drawer operates independently, so you can run one while the other is still full or load them both for maximum efficiency.

The DD605 is equipped with multiple wash programs, providing tailored cleaning options for different types of dishes. These include heavy, normal, and delicate cycles, alongside a quick wash option for those in a hurry. The adjustable rack system ensures easy loading for items of various sizes, adapting to your changing needs.

In terms of technology, the DD605 incorporates SmartDrive technology, which uses a direct drive motor for better efficiency and reliability. This not only reduces noise during operation but also enhances wash performance. Additionally, the dishwasher features an Eco-option for environmentally conscious users, optimizing water and energy usage without compromising on cleaning efficacy.

Safety and convenience are paramount in the design of the DD605. It includes features such as a child lock to prevent accidental opening and a water softener that ensures sparkling clean dishware, free from spots or residue. The intuitive controls and clear display make it easy to select programs and monitor the washing process.

With its sleek appearance, flexible loading options, advanced cleaning technologies, and energy-efficient operation, the Fisher & Paykel DD605 is an excellent choice for those seeking a high-quality built-in dishwasher that enhances the modern kitchen experience. Whether you are looking to save time, energy, or space, this model delivers on all fronts, marrying style with practicality.
Top Page Image Contents