INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY - INSTALLING THE FRONT PANELS | 17 |
19a ADJUST PANEL HEIGHT TO ALIGN THE CABINETRY GAPS 20a FITTING A CUSTOM TOEKICK PANEL
16 mm x5
+ or - 2 mm
With the front panels fitted, insert an appropriately sized Philips screwdriver into the hole above the door pin and rotate the panels up or down to align the gaps in your cabinetry.
Repeat on the other side if necessary.
Each panel has a maximum travel of 2 mm up or down.
Important!
Ensure that you maintain a minimum of 8 mm ventilation gap between the upper and lower panels.
You can optionally glue your custom toekick panel onto the supplied panel