Fisher & Paykel DD24DT installation instructions Final Checklist, Troubleshooting

Page 9

(2,2) -3- 599632C DD24D TALL installA2 USCA.indd 15/4/09 11:51:47 AM

13FINAL CHECKLIST

Check all parts are installed.

Ensure product is level, securely fastened to the cabinetry and opens and closes freely. The DishDrawer® must be free to fully close with no resistance from the cabinetry.

Ensure inlet hose to water supply has rubber washer fitted and is tightened a further half turn after seal contact.

Ensure any knockouts or plugs in drain connection have been drilled out and drain connection has been made.

The drain hose joiner must not support the weight of excess hoses. Keep hoses as fully extended as possible to prevent sagging. Any excess length of hose should be kept on the dishwasher side of the high loop.

If using Plumbing and Drainage OPTION A, ensure the Highloop is a minimum 6” (150 mm) higher than the drain hose joiner.

Turn on the power and water supply. Then press the Power () button to turn the DishDrawer® on. The DishDrawer® should beep and Wash Programme lights light up.

Check the spray arm is in place and free to rotate.

Spray arm

Add three cups of water into the DishDrawer®. On the Wash Programme Selector Panel press Rinse and close the drawer(s). Start the programme by pressing the Start/Pause ( ) button.

After the Rinse programme has finished, ensure machine has run and drained correctly.

Check water supply and drainage connection for leakage.

Repeat for each drawer.

14TROUBLESHOOTING

Excessive water remaining above the filter plate, after the rinse cycle

Check for kinked drain hoses or blocked waste connection, high loop not properly installed or drain hoses not routed correctly.

No water supply (shows on display-models with LCD only)

Check water is connected, turned on and the spray arm(s) are correctly fitted and free to rotate.

No lights come on when the drawer is opened

Ensure power is connected and is switched on. Check if Auto Power option is on.

Water around water supply and drainage connections

Check connections, existing plumbing and hoses for leaks. Check washer and hose clamps are correctly fitted.

If product is tipping

Ensure the product is secured to the cabinetry.

If front panels are misaligned

Check and relevel product. Check the cabinetry is square.

Drawer(s) don’t close properly

Ensure nothing is obstructing the drawer(s) from closing properly eg sound insulation, hoses or drawer latches.

If a problem occurs, consult the Troubleshooting section of the User Guide. If after checking these points you still need assistance, please refer to the Service & Warranty book for warranty details and your nearest Authorized Service Centre, or contact us through our website, www.fisherpaykel.com.

www.fisherpaykel.com www.fisherpaykel.ca 599632C US CA 04.09

Image 9
Contents Safety and Warnings Installation instructionsCabinetry Dimensions Product DimensionsParts Supplied Cavity PreparationScrews 30150mm Optionally Hard Wiring the ProductTie together to Avoid kinking Route the HosesMove Into the Cavity Attach Side Mounting BracketsIf top mounting brackets are being To prevent kinked hosesSecure the Product Level and Secure the ProductRefit the Drawer FINALLY, for Both METHODS, FIT the ToekickPlumbing and Drainage Options To required heightMin. R Troubleshooting Final Checklist

DD24DT specifications

The Fisher & Paykel DD24DT is a standout model in the realm of dishwashing technology, designed to cater to modern households' needs while ensuring efficiency and performance. This double drawer dishwasher offers exceptional versatility, accommodating various dish sizes and types, making it an excellent addition to any kitchen.

One of the main features of the DD24DT is its two separate wash drawers, which allow users to wash different types of dishes concurrently. This design is particularly beneficial for those who entertain frequently or have larger families, as it enables the washing of smaller loads without needing to wait for a full-sized dishwasher cycle. Each drawer operates independently, meaning one can run a quick wash while the other remains empty, optimizing cleaning times and energy efficiency.

The DD24DT utilizes advanced DishDrawer technology, which incorporates smart sensors and programs designed to customize the wash cycle based on load size and soil level. With a variety of wash programs available, users can select from options such as quick wash, heavy-duty, and eco modes. This level of customization ensures that delicate items are treated with care while tougher loads receive the cleaning power they require.

Another notable characteristic is its impressive energy efficiency. The DD24DT is designed to use minimal water and energy without compromising cleaning performance, making it an eco-friendly choice for environmentally conscious consumers. In addition, the dishwasher is equipped with a quiet operation feature, ensuring it runs softly in the background while you go about your daily routine.

The design of the Fisher & Paykel DD24DT is both stylish and functional. The stainless steel finish adds a contemporary look, while the convenient front-facing controls make it easy to operate. The angled design of the drawers enhances accessibility and minimizes bending or reaching, making dish loading and unloading a breeze.

Moreover, the dishwasher is engineered with a robust filter system and a unique wash system that ensures every dish comes out sparkling clean. The adjustable tines within each drawer provide versatility in loading larger pots and pans, while the soft-close drawers add to the appliance's appeal by preventing slamming.

In summary, the Fisher & Paykel DD24DT double drawer dishwasher excels in performance and design. With its innovative technology, energy efficiency, and sleek aesthetics, it stands out as a top choice for those looking to enhance their kitchen experience.