![](/images/new-backgrounds/1076653/7665317x1.webp)
Installation instructions
Installing the air-switch (optional)
7
1Select a location on the bench top for the air switch to be positioned (recommended position is near the sink). Mark and cut a hole, 33mm in diameter, in the bench top.
2Remove the nut from the thread of the air switch (fig.12).
3Feed one end of the PVC tubing up through the cutout, from the underside of the bench top, and attach to the underside of the push button.
4Insert the push button into the bench top cut out (fig.12). Feed the PVC tube through the nut. Screw the nut onto the thread tightly (fig.13), securing the push button tightly onto the bench top.
Note:
Do not use a wrench to tighten the nut.
5Connect the other end of the PVC tubing to the air switch outlet, located on the underside of the waste disposer (fig.14).
Fig. 12 Fitting the air switch
Fig. 13 Securing to the bench top
Controlling the waste disposer by a wall mounted switch
The waste disposer can be controlled by means of a wall mounted switch rather than the bench mounted air switch supplied with the product.
To use an existing wall mounted switch:
Fig. 14 Connecting tube to air switch outlet
1Connect one end of the PVC tubing to the underside of the air switch button.
2Connect the other end of the PVC tubing to the air switch outlet on the underside of the waste disposer (as shown in fig.14).
3Press the button on the air switch to activate the waste disposer.
4Whilst the waste disposer is running, disconnect the PVC tubing from the air switch outlet on the underside of the waste disposer.
5Turn the waste disposer off using the wall mounted switch. The waste disposer can now be turned on and off using the wall mounted switch.