Use and Care, Installation | Thermador PHREM specification

The Thermador Pro Hood Remote Control is designed for use in applications where the controls on the hood are not accessible. The remote control can be installed on any vertical surface. It is most often installed in the kitchen backsplash or just above the backsplash in the back wall. The Pro Hood Remote Control is compatible with Pro Hood model numbers ending in 03 or higher. The model number is printed on the serial label on the back wall of the hood.

Use and Care

Refer to “Operating the Hood” in the Pro Hood Care and Use Manual for operating instructions.

The remote control can be wiped clean with a damp cloth. Be careful not to use excessive water as it could damage the controls. Refer to the Care and Use Manual included with your Pro Hood for more detailed instructions.

Installation

Equipment Needed: Drill and Bit Screwdriver

Keyhole saw (or equivalent depending on installation surface)

Rubber Mallet

Equipment Included:

Remote Control

Extension Cable

Anchors (2)

Screws (2)

Installation Instructions

Screw Covers (4)

1.Disconnect power at breaker.

2.Attach the hood in the desired location using either the ceiling (island hoods only), wall or cabinet installa-

Remote Connection;

Connect Extension Cable

Here

Power Supply Box;

Disconnect Control

Harness and Connect

Remote Harness Here

tion method described in the Pro Hood Installation Instructions (included with the hood).

Before installing duct covers and integral blower or connecting wiring, install the remote control as described below.

3.Prepare Hood for Installation.

WALL OR CABINET MOUNT HOODS:

Remove 3 screws from the front edge of the light panel and set aside. Support panel while removing.

Behind light panel, disconnect halogen lights at

plastic wire connectors and heat lamps (if applicable) at flag connectors (one yellow and one white

for each lamp).

Set light panel aside.

CEILING MOUNT ISLAND HOODS:

Remove 1 screw from channel run cover. Set panel and screw aside.

Remove 5 screws from front filter tray. Set tray and screws aside.

Remove 3 screws from control panel cover. Set panel and screws aside.

(Over)

Remote Connection;

Connect Extension Cable

Here

Power Supply Box;

Disconnect Control

Harness and Connect

Remote Harness Here

Figure 1: Pro Hood with Light Panel Removed

Figure 2: Pro Island Hood with Panels Removed

PHREM specifications

The Thermador PHREM, a standout in the realm of premium kitchen appliances, represents the pinnacle of performance and design. This remarkable range hood is tailored for culinary enthusiasts who demand the best in both functionality and style. With its sleek design and powerful features, the PHREM is not just an appliance; it is a statement piece that elevates any kitchen environment.

One of the standout features of the Thermador PHREM is its powerful ventilation system, which boasts a maximum airflow of up to 1200 CFM. This high capability ensures that even the most challenging cooking tasks can be managed without compromising air quality in the kitchen. Whether frying, baking, or simmering, the PHREM effectively captures smoke, odors, and grease, keeping the air fresh and clean.

The PHREM incorporates advanced noise reduction technology, allowing for a quieter operation. This feature transforms the home cooking experience by reducing the distractions typically associated with powerful ventilation systems. With lower noise levels, home chefs can focus on their culinary creations without the interruption of excessive fan noise.

Another notable aspect of the Thermador PHREM is its innovative lighting. The range hood is equipped with state-of-the-art LED lights that provide bright and efficient illumination. This not only enhances visibility while cooking but also adds ambiance to the kitchen. The lights are energy efficient, ensuring that you can enjoy a well-lit workspace without significant energy consumption.

The Thermador PHREM is compatible with multiple control options, including touch controls and optional remote control, allowing for easy operation. This versatility ensures that users can adjust settings seamlessly, even when their hands are busy with meal preparation.

Constructed from high-quality stainless steel, the PHREM not only offers durability but also an elegant aesthetic that enhances any kitchen design. The stainless steel finish is easy to maintain, resisting fingerprints and smudges, which is crucial for keeping your kitchen looking pristine.

In conclusion, the Thermador PHREM is a sophisticated range hood that fuses powerful performance with refined design. Its high airflow capacity, noise reduction features, efficient lighting, and flexible control options make it an indispensable tool for discerning home chefs. Combined with its stylish appearance, the PHREM is a worthy investment for anyone looking to enhance their cooking space.