GE 162D9639P004 owner manual USE of Extension Cords, Safety Instructions Operating Instructions

Page 3

www.GEAppliances.com

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Safety Instructions Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard

3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If you have only a standard

2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Installation Instructions Troubleshooting Tips Consumer Support

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Write the model and serial numbers here Model # Serial # RefrigeratorsInstallation Instructions Operating Consumer Support TroubleshootingCFC Disposal USE of Extension Cords Safety Instructions Operating InstructionsUSE of Adapter Plugs Tips Installation Instructions Operating InstructionsAbout the control How To Test TemperaturesDoor Shelves About the refrigerator featuresShelves Ice Tray CompartmentCare and cleaning Refrigerator Cleaning the OutsideCleaning the Inside Preparing to Move Care and cleaning of the refrigeratorDefrosting Preparing for VacationPreparing to install the refrigerator Read these instructions completely and carefullyTips Consumer Support Cubic Foot Models Door ReversalTop cover Problem Possible Causes What To Do Before you call for service…Outside of refrigerator Refrigerator too warmRefrigerator has odor Moisture forms onSafety Instructions One Year Operating Instructions InstallationGE Will Replace What GE Will Not CoverExtended Warranties Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio
Related manuals
Manual 12 pages 61.78 Kb

162D9639P004, 2 specifications

The GE 3 and 4,2 are advanced electric locomotive models produced by General Electric, recognized for their robust performance, efficiency, and technological innovations. These locomotives have become staples in freight transportation, contributing significantly to the evolution of railway systems.

The GE 3 model offers a powerful traction system with a horsepower rating typically ranging from 2,500 to 3,200 HP, which enables it to handle heavy freight loads across various terrains. One of its primary features is the AC propulsion technology, providing smoother acceleration and improved traction compared to traditional DC systems. This technology enhances energy efficiency, reducing operational costs for railway operators.

A notable aspect of the GE 3 is its modular design, allowing for easy upgrades and maintenance. This design philosophy ensures that the locomotive can be adapted to meet changing operational demands without extensive overhauls. Additionally, the GE 3 is equipped with advanced braking systems, including dynamic and regenerative braking, which not only improves safety but also contributes to energy savings by converting kinetic energy back into usable power.

Turning to the GE 4,2, this model continues to build upon the strengths of its predecessors while introducing several new features. It typically has a horsepower range of about 4,200 HP, making it suitable for even heavier freight trains. The GE 4,2 is designed with enhanced aerodynamics, which helps reduce drag and improve fuel efficiency.

This locomotive also showcases cutting-edge technology with its onboard diagnostics system. This system monitors various parameters in real-time, enabling predictive maintenance and reducing downtime. The GE 4,2 is also equipped with the latest traction control technology, which optimizes wheel slip performance, further enhancing its ability to operate efficiently under challenging conditions.

Both the GE 3 and GE 4,2 are designed with operator comfort in mind. They feature ergonomic cab designs with modern instrumentation, reducing fatigue for locomotive engineers during long-haul operations. Safety features are further bolstered by advanced signaling and communication systems, ensuring compliance with contemporary rail safety standards.

In conclusion, the GE 3 and 4,2 locomotives exemplify the intersection of power, efficiency, and cutting-edge technology in freight transportation. Their commitment to performance and sustainability positions them as key players in the future of railway logistics, continually adapting to meet the demands of the industry.
Top Page Image Contents