Step TWO Overhead Hood | Thermador GGS36, SGS36G, SGS30, SGN36G, SGN30

STEP TWO: OVERHEAD HOOD

•Thermador recommends use of a ducted hood over this cooktop. For wall-mounted hood installations, Thermador recommends that the hood should have a certified rating of no less than 350 CFM on the highest setting. The exhaust hood must be installed according to instructions furnished with the hood.

Observe all local codes and ordinances govern- ing residential cooking and ventilation require- ments.

	HOODS
WALL	ISLAND

STEP THREE: ELECTRICAL REQUIREMENTS & GROUNDING

THIS APPLIANCE MUST BE CONNECTED TO A RECEPTACLE ON A CIRCUIT RATED 120 VOLTS, AC 60HZ., 15 AMPERE

Recommended Grounding Method

Always disconnect electric supply cord from wall outlet before servicing this appliance.

Observe all governing codes and ordinances when grounding. In the ab- sence of these codes or ordinances observe National Electrical Code ANSI/ NFPA No. 70 Current Issue.

This appliance is factory equipped with a power supply cord with a three- prong grounding plug (with polarized parallel blades). IT MUST BE PLUGGED INTO A MATING GROUNDING TYPE RECEPTACLE, CON- NECTED TO A CORRECTLY POLARIZED 120 VOLT CIRCUIT. Improper polarization will cause malfunction (such as continuous sparking of the burner igniters) and may damage this appliance and could create a condition of shock hazard at the igniter of each burner. If the circuit does not have a grounding type receptacle, it is the responsibility and obligation of the installer or user to have the existing receptacle changed to a prop- erly grounded and polarized receptacle in accordance with all applicable local codes and ordinances by a qualified electrician. In the absence of local codes and ordinances, the receptacle replacement shall be in accor- dance with the National Electrical Code. THE THIRD GROUND PRONG

SHOULD NOT UNDER ANY CIRCUMSTANCES, BE CUT OR REMOVED. See Fig. 2.

Alternate Grounding Method - See Fig. 3.

If installing a properly grounded wall receptacle is impossible at the time of installation, consult your local electrical inspector for permission to connect a temporary adapter (with polarized blades) which could be plugged into your present 2-wire receptacle. This is not recommended.

If this is done, you must attach the lug and/or the green adapter wire to the receptacle cover plate screw. Ground from it to a grounded metal cold water pipe,* see Fig. 3. DO NOT GROUND TO A GAS SUPPLY PIPE.

Fig. 2

Three Prong

Receptacle

Receptacle Box	➝
Receptacle Box
Cover Plate
➝

➝ Three Prong Plug

Fig. 3

Two Prong

Receptacle

	Cover		➝
	Plate		➝
	Plate
Ground	➝
Ground
Wired➝
		Ground
	➝	Wire	➝	➝
	Three Prong			➝
	Three Prong
➝	Adaptor
Three		Grounded		Cold
Prong		Water Metal Pipe
Plug

You must permanently ground the adapter before connecting the appli- ance to the power supply.

CAUTION: Attaching the adapter ground wire to the wall receptacle cover screw does not ground the appliance unless the cover screw is grounded through the house wiring.

If there is any doubt as to whether the wall receptacle is properly grounded, the customer should have it checked by a qualified electrician.

Cold water pipe must have metal continuity to the electrical ground and not be interrupted by plastic, rubber or other electrically insulating connectors (including water meter or pump) without adding a jumper wire at these connections. See Fig. 4.

Fig. 4	No. 4 Wire
	➝

➝		➝
Metal		Clamp
Metal
Water
Pipe

➝

Clamp

➝

Meter

Page 4

GGS365, GGS30, GGN365, GGN30, GGN36 specifications

The Thermador SGNCV36G, SGN36G, SGN30, GGNCV30, and GGNCV36 are part of Thermador’s premier collection of gas ranges, designed for culinary enthusiasts who prioritize performance, style, and technology in their kitchen. These models illustrate Thermador's dedication to professional-grade equipment, integrating robust features and advanced technologies that cater to both home chefs and culinary artisans.

One of the standout characteristics of these ranges is their powerful heating elements. Each model is equipped with Thermador’s signature Star Burner design, which delivers superior heat distribution for even cooking results. With an impressive output ranging from 18,000 BTU for quick boiling to low simmer settings, users can easily navigate a wide array of cooking techniques, whether searing meats or delicate sauce preparation.

In addition to exceptional heating capabilities, the Thermador SGNCV36G and the GGNCV36 feature a seamless surface design that not only enhances aesthetic appeal but also simplifies cleaning. This innovative design minimizes gaps and crevices where food particles can accumulate, making maintenance a breeze. Moreover, the ranges come with continuous grates, allowing for easy movement of pots and pans across the cooktop without lifting.

These ranges also incorporate advanced technologies such as the MultiPoint Temperature Probe that offers precise cooking results by monitoring the internal temperature of meats, ensuring they are cooked perfectly every time. The iconic Thermador oven features include various cooking modes, such as convection baking and roasting, to elevate your culinary creations further.

The design of the SGN and GGNC models is equally impressive, with sleek stainless-steel finishes and professional-style knobs offering a modern yet timeless look that fits seamlessly into any kitchen decor. The built-in features, like the soft-close oven door and triple-glazed oven window, enhance usability and convenience.

In summary, the Thermador SGNCV36G, SGN36G, SGN30, GGNCV30, and GGNCV36 gas ranges are a testament to Thermador’s commitment to excellence in the kitchen. With features designed for the serious cook, from powerful burners and easy-to-clean surfaces to advanced technological integrations, these ranges promise a cooking experience that is both efficient and gratifying. Embrace the art of cooking with Thermador, where high-performance appliances meet refined design.