GE ZDBR240 Wood drawer fronts, Loading tips and suggestions, Removing full extension drawers

Page 10

Loading tips and suggestions

Controls and Features

Beverage Center

The bottom two full extension drawers hold five bottles each and are loaded with necks facing the rear. Tall bottles should not be loaded on the bottom drawer because they may prevent the door from closing.

•Do not block the thermistor, located on the right-hand side, just above the third

shelf of the beverage center. Blocking the thermistor could impair the air circulation and temperature control.

NOTE: This unit is for storing beverages only

and not intended for the storage ofBottom drawer arrangement perishable foods.

Removing full extension drawers

The bottom full extension drawers pull out so bottles can conveniently be added or removed.

The upper full extension slide can be removed for magnums or larger bottles.

To remove:

1.Pull the full extension drawer out to the STOP position.

2.Push the tab on right drawer guide down while pulling the tab on left guide up, and pull the drawer out.

To replace:

1.Push the drawer slide arm back into the unit.

Appearance may vary

Sub-assembly

Tab (push tab down on right drawer guide, pull tab up on left drawer guide)

Sub-assembly

2.Pull the small slide sub-assembly completely forward.

3.Insert the sides of the drawer back into the guides.

4.Push until the tabs lock into place.

To replace, push drawer slide

Pull small slide sub-assembly

arm back into unit

completely forward

NOTE: Make sure the tabs on the full extension drawer guides are fully engaged before loading any bottles. Pull the drawers out all the way to the STOP position and push back in several times to make sure locking tabs are properly engaged.

Wood drawer fronts

The full extension drawer fronts on the beverage center are unfinished cherry wood. During use, oil from hands may accumulate and stain the wood.

•The drawer fronts may be stained and sealed to match adjacent cabinetry. The tinted glass will make the stained wood appear darker. A true color match can be seen only when the door is opened.

•Apply the stain and sealer according to the manufacturer’s instructions. To avoid unpleasant odor, keep the door open to ventilate and allow the stain/sealer to dry completely before using the product.

NOTE: Natural wood may vary slightly in grain and color.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents ZDBR240 ZDBI240 Introduction ContentsBefore using your beverage center Write down the model & serial numbersIf you received Damaged appliance If you need serviceAfter installation is completed Save time & money Remove packagingDo not USE AN Adapter Plug or Extension Cord Read and Save These InstructionsRefrigerants Adapter plugs not permitted in CanadaRéfrigérants Lire ET Conserver CES InstructionsFiches d’adaptation non permises au Canada HOW to Connect Electricity Raccordement Électrique Ne coupez ni retirez en aucun casInterior light and light pad Controls and FeaturesTemperature control Child control lockoutQuickSpace shelf Glass shelvesRemoving full extension drawers Wood drawer frontsLoading tips and suggestions To removeCleaning the outside For your safetyCare and Cleaning Event of a power failure Preparing to moveCleaning the inside Drain holeProblem Solver Normal operating soundsProblem Solver Questions? Use this problem solverInterior Light Wine or Beverage Storage and Handling Notes Wine or Beverage Storage and Handling Notes Wine or Beverage Storage and Handling Notes Consumer Services In-Home Repair ServiceWarranty From the Date Original Purchase

ZDBR240 specifications

The GE ZDBR240 is a revolutionary appliance in the realm of refrigeration that embodies efficiency, functionality, and modern technology. This dual-zone refrigerator stands out not only for its sleek design but also for its advanced features that cater to the needs of today’s consumers.

One of the main features of the GE ZDBR240 is its advanced cooling system, which includes a multi-air flow system. This system ensures that the cold air is evenly distributed throughout the refrigerator and freezer compartments, promoting consistent cooling and preserving food for longer periods. Additionally, the unit is equipped with advanced temperature control technology, allowing users to customize settings according to their specific storage needs.

The ZDBR240 also boasts an impressive storage capacity, with flexible shelving options that maximize space. The adjustable shelves can be repositioned to accommodate a variety of items, from tall bottles to large party trays, making it ideal for any household. The full-width deli drawer is another practical feature, providing an ideal environment for meats and cheeses, while the humidity-controlled crisper drawers keep fruits and vegetables fresh.

Energy efficiency is a hallmark of the GE ZDBR240, which is designed with energy-saving technologies that reduce power consumption. The unit meets or exceeds ENERGY STAR standards, allowing users to enjoy savings on their energy bills while minimizing their environmental impact.

The refrigerator also incorporates smart technology, allowing users to monitor and control temperatures and settings via a mobile app. This connectivity provides peace of mind, enabling users to check the status of their refrigerator remotely and receive alerts if temperatures deviate from the set range.

Additionally, the GE ZDBR240 features a sleek stainless steel finish that complements any kitchen décor. The easy-to-clean surfaces and fingerprint-resistant design ensure that the refrigerator remains attractive and functional.

In summary, the GE ZDBR240 stands out as a top choice for those seeking a reliable, feature-rich refrigerator. With its advanced cooling technologies, flexible storage options, energy efficiency, and smart capabilities, it meets the diverse needs of modern households while enhancing the kitchen with its stylish appearance. This appliance is a perfect blend of innovation and practicality, making it a solid investment for any home.
Top Page Image Contents